Model #ED2JHGXRQ00 WHIRLPOOL Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Unit Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Icemaker Parts, Optional Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

wires on ice maker

A:

I know how confusing it can be when your dealing with wires. I researched your question and was unable to locate information that would be helpful. An expert will respond shortly. Have a great day!

Read More
Jackie S -
February 17, 2012
A:

Thank you for your question. I'm sorry you are having this problem with the icemaker harness. The harness has a plug in connector on both ends. I'm attaching a picture of the harness. Not all harnesses will have the thermo-fuse. I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
February 18, 2012
See more answers
Q:

ice maker not working

A:

The ice maker not working properly can be an inconvenience and keep you from enjoying some ice cold beverages. I am adding a link below to help you with your question while you wait for your expert response.

Read More
Joseph P. -
February 13, 2012
A:

Thank you for your question. I know it's disappointing when the icemaker stops working. This icemaker has some test terminals on the module that may help determine what the problem is. To access the terminals, pull the front cover off of the icemaker. The terminals will be marked (see picture) and using a well insulated jumper, place it between the L - V terminals. Be careful this is a hot (live) check. With the jumper in place, water should flow to the icemaker. If water does flow, the icemaker # 4317943 will need to be replaced. If no water flows but you can hear a humming noise, the water valve # W10408179 will need to be replaced. If nothing at all happens, some voltage checks will need to be made. A technician may be needed to make these checks. I'm listing a site you can access, to have a tech come out. Here is a link for the website: Sears Home Services . If you would like more assistance, reply to this thread and I will be glad to assist you further. Thank you for using Manage My Life.

Read More
Scott D -
Sears Technician
February 14, 2012
See more answers

Top Parts