Model #ED2JHGXRB00 WHIRLPOOL Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Unit Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Icemaker Parts, Optional Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

how to replace

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Jackie S -
December 01, 2011
A:

thanks Jackie fyi,,,the part numbers involved, according to your sears part chat folks are: W10169511 and 2254588

Read More
Patrick -
December 01, 2011
A:

Thank you for your question.

I will be happy to assist you with replacing the parts. First, you will need to remove the ice bin from the refrigerator. It should just slide out. Then remove any of the shelves that are in the way of the bracket. Now unplug the refrigerator so there is no chance of getting shocked. Then remove the screws that secure the bracket to the refrigerator. Once it is loose, go ahead, and pull it away from the wall so you can disconnect the wires. After making note of the wire connections, disconnect them and remove the whole assembly. Now you have to remove the coupler. To remove this coupling will require, holding the motor shaft with some channel lock pliers and turning the coupling clockwise, to remove it. If the threads on the motor shaft are damaged or are damaged, the motor will need to also be replaced. After the coupler is removed, you can remove the screws securing the motor and the solenoid. Reinstall the parts in the reverse order on the new bracket. Once assembled install the assembly in the refrigerator.

I hope this is helpful. Please let me know if you need further assistance.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
December 04, 2011
See more answers

Top Parts