Model #ED2FHEXNQ00 WHIRLPOOL Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Unit Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Icemaker Parts, Optional Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How to check this icemaker and water valve?

A:

There are some test terminals on this icemaker module, that can help determine, what the problem is. To access the module, pull the front cover off of the icemaker. You will now see the module and the test terminals will be marked (I'm sending you a picture). Use a well insulated wire and place it between the L-V terminals. Be careful this is a hot (live) check. With the jumper in place, water should flow to the icemaker. If water does flow, the icemaker # 4317943 will need to be replaced. If no water flows, the water valve # 4389177 will probably need to be replaced. A voltage check needs to be made to determine for sure. With the jumper in place, check voltage at the valve. The wires must still be connected to the valve, when making this check. If there is still no voltage at the valve, it will indicate a broken wire in the cabinet. In this case, it's not repairable. I recommend having a technician check to verify, if this is the case. If you need more assistance, you can resubmit your question with more details.

Read More
Scott D -
Sears Technician
October 16, 2009
Q:

How do you remove the motor coupling from the augur motor?

A:

You will need a pair of needle nose vice-grips to clamp down behind the coupler on the motor shaft to prevent it from rotating while turning the coupler clockwise (CW) to unscrew it. It will require some force or a sharp impact to break it loose before it will un-screw easily.

NOTE:Remember to turn the motor coupler CLOCKWISE (CW)

Read More
Joey S -
Sears Technician
November 13, 2008

Top Parts