Model #ED22DQXEN01 WHIRLPOOL Side-by-Side Refrigerator

  • Cabinet
    3 Results
  • Refrigerator Liner
    3 Results
  • Refrigerator Shelf
    3 Results
  • Freezer Liner
    3 Results
  • Air Flow
    3 Results
  • Motor And Ice Container
    3 Results
  • Refrigerator Door
    3 Results
  • Freezer Door
    3 Results
  • Dispenser Front
    3 Results
  • Unit
    3 Results
  • Icemaker
    3 Results
  • Control
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Do I need a bottom hinge spacer to elevate my refrigerator door?

A:

I understand the importance of keeping the doors aligned on your refrigerator. I have done some research and have located and provided a link that you may find helpful while you are waiting for a detailed reply from an expert. Hope this helps!

Read More
Priscilla V -
June 11, 2012
A:

Thank you for your question. I can understand your concern about the door sagging. Normally adjusting the cabinet will also adjust the doors. Push on the cabinet sides and watch to see if the door moves and becomes level with the other door. If it does, shim that side of the cabinet to keep the door in place. If the door does not adjust, loosen the top door hinge and push the door back. Then retighten the hinge. There is usually a small amount of adjustment that may correct this problem. If it still sags, the upper closer # 4318165 and lower closer # 2155311 will probably need to be replaced. These parts are available at http://www.searspartsdirect.com/partsdirect/part-model/Whirlpool-Parts/Refrigerator-Parts/Model-ED22DQXEN01/1198/0165000?pathTaken=&prst=0&shdMod=ED22DQXEN01&sid=MMLxexpertxmerch . I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
June 12, 2012
See more answers

Top Parts