Model #ED22DQXAW00 WHIRLPOOL Side-by-Side Refrigerator

  • Cabinet
    3 Results
  • Refrigerator Liner
    3 Results
  • Refrigerator Shelf
    3 Results
  • Freezer Liner
    3 Results
  • Air Flow
    3 Results
  • Motor And Ice Container
    3 Results
  • Refrigerator Door
    3 Results
  • Freezer Door
    3 Results
  • Dispenser Front
    3 Results
  • Unit
    3 Results
  • Icemaker
    3 Results
  • Control
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How do I install a shelf stud in a Whirlpool Refrigerator? Model ED22DQXAW00. If I just press it in, it is NOT stable...

A:

I can see how you maybe a bit frustrated over your situation, while you wait for the expert to answer i would suggest for you to look at the owner's manual you can view it on this website. I did try entering the modal number that you provided but i had no luck. You might want to double check, once you do you can look at the top of this page and notice that their is a tab that says manuals hit it and enter the model number good luck.

Read More
celene -
October 15, 2010
A:

I can understand your concern. After inserting the support it must be turned 1/4 revolution. Note: If the support stud is round then you have nothing to worry about, but if it has a flat side and it must be facing a specific direction make sure you allow for the 1/4 turn. Once you turn and lock the shelf stud in, there is no removing it and using it again. Also, do not grip the stud, grip the two flat spots on the base when you use a pair of pliers to turn and lock it in position.

Read More
Joey S -
Sears Technician
October 16, 2010
See more answers

Top Parts