Model #EB23B COLEMAN / EVCON IND. Furnace/Heater, Electric

  • Functional Replacement Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

need diagrahm for eb23b EB23B Coleman / Evcon Ind. Furnace

A:

The wiring diagram for your furnace is in the installation guide. Here's a direct link for the installation guide for that furnace: Installation Manual.

If you need more help, let us know.

Thanks for choosing Sears PartsDirect.

Read More
Lyle W -
Sears Technician
April 06, 2015
Q:

My EB23B Coleman electric furnace wont shutoff.

A:

Good morning... I can fully understand your concern regarding this issue. I did locate a link that will discuss this situation in greater detail. Keep in mind that an expert will be responding within the next two business days if not sooner and will likely offer you more information and instruction. I hope this link will help guide you as to what might wrong with your heater and have a nice day

Read More
Henry -
December 30, 2012
A:

Thank you for your question. I can understand your concern about the furnace. The information you have received is good. This type of problem will usually be caused by a stuck sequencer. This model has two sequencers and most of the time the sequencers come separately but it appears these sequencers will come together in a kit # 3120A3571. D high voltage furnace and I would recommend having a technician make this check and repair. I'm listing a site you can access, to have a tech come out. Here is a link for the website: Sears Home Services . I hope this will help you. If you would like more assistance, reply to this thread and I will assist you further.

Read More
Scott D -
Sears Technician
January 02, 2013
See more answers
Q:

My EB23B furnace is beeping and there is a light that flashes as it beeps. I've turned off the power switches to it. What can I do now?

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Alina F. -
March 29, 2012
A:

Thank you for your question. I'm sorry you are having this problem with your furnace. I have checked with the source on this and was informed the motor on the roof in the blend air system can cause this problem. A technician may be needed to make this check. I hope this will help you.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
March 30, 2012
See more answers