Model #EB15A COLEMAN / EVCON IND. Furnace/Heater, Electric

  • Functional Replacement Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

5 or 6 prong??? EB15A Coleman / Evcon Ind. Furnace

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

 

Read More
Joseph P. -
August 05, 2013
A:

Thank you for choosing searspartsdirect.com.

Its appears that part 3110-3301 has six prongs.

I hope this helps you.

Read More
JessicaM -
Sears Technician
August 06, 2013
See more answers
Q:

instructions to put together a coleman heater

A:

Managemylife.com is a great place to find the answers to just about anything, especially on appliances. I would suggest that you provide a little more information such as the make and complete model number of your heater so your expert will be able to provide you the best possible answer. Just click on reply below where you can provide the additional information.

Read More
Barbara H. -
November 19, 2011
A:

it is a coleman evcon model #is eb15a trying to replace the blower motar

Read More
christinabutler -
November 19, 2011
A:

Thank you for your question on the Coleman heater.

On most of the furnaces for the blower motor you will need to remove the blower motor cage from the blower housing. This may require that you disconnect the wires for the motor from the terminal block and then remove the whole fan housing from the furnace.

Once you have removed the fasteners you should be able to pull the whole fan housing from the furnace and then be able to work on replacing the fan motor.

If you remove any wires from the terminal block please mark there locations so you can correctly wire it with the replacement motor.

Then you can remove the blower wheel from the motor shaft by loosening the squirrel cage fan from the motor shaft by loosening the set screws of which there may be two.

Slide the fan off the motor shaft and remove the fan motor from the cage.

Some of the fan motors will have a universal mounting system that may be different from the original. This is pretty common.

I have given you a list of motors below that will replace the original motor. In some cases you may have to purchase a universal mounting kit also.

BLOWER MOTOR (230V. 60 HZ. 3.2 AMPS) (ALL) (FASCO #7126-3227, A. O. SMITH #F48D54A48, G-E #KCP36KGR673S

I hope this will help.

Please let me know how it went and if you need anymore help please give details as to the problem you are having putting the unit back together.

Sam A.

Read More
Sam A -
Sears Technician
November 21, 2011
See more answers