Model #E640 CANON Misc Camcorder

  • No Image Available - Fidelitone
    3 Results
Find part by diagram >

Question and Answers

Q:

removing dishwasher arm GSD600L-01

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Julio -
June 11, 2013
A:

Thanks for contacting ManageMyLife.com. I understand how frustrating it is having trouble with the spray arm inside the dishwasher. We are here to help. I suspect the spray arm needs to be replaced. To replace the spray arm do the following:

  1 Turn off the circuit breaker to the dishwasher. It is always a good idea to turn off the power supply to the appliance before making repairs.

  2 Open the dishwasher door and pull the bottom dish rack out of the dishwasher. The rack will simply roll out of the dishwasher.
 
 3 Turn the spray arm until you see the notch at the base of the spray arm assembly. The notch goes through the base. Locate the small clip that secures the spray arm to the dishwasher hub.
 
 4 Insert a flat-head screwdriver into the notch and pry the clip away from the hub. Do not bend the clip if you are not replacing the spray arm. GE only has the clip in a complete replacement kit. Remove the clip and position the screwdriver all the way through the notch in the spray arm base so that you can grab the screwdriver on both sides.
 
 5 Grab the screwdriver with both hands and turn the spray arm assembly counterclockwise to remove it from the dishwasher hub. I hope this helps.
 
To order dishwasher parts, please visit SearsPartsDirect.com with the model number.
 
If you do not feel comfortable repairing this problem yourself, then you can have it repaired at your home by a Sears Technician. You may visit SearsHomeServices.com and follow the instructions, then click on the red next now button.
 
Please feel free to let me know if you need further assistance. We are always here to help.
 
Thank you for using ManageMyLife.com.
Read More
John H -
Sears Technician
June 12, 2013
See more answers
Q:

Help fixing MTD Snow blower

A:

I know how important it is to have the snow blower moving properly so that you can maneuver your snow blower easily. While you are waiting for an expert answer, I did manage to find a link that describes a similar problem to the one that you are having. I hope my link is useful.

Read More
Joseph P. -
January 12, 2011
A:

Thank you for your question.

I am sorry you are having a problem with your snow blower. I should be able to help you with reattaching the cable for the drive. To access the lower end of the cable tip the snow blower onto its nose first. Then remove the bottom cover of the snow blower. This will give you access to the cable connection. I have provided you with a few images that will aid in connecting the cable. If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 13, 2011
A:

Thanks, I figured that part out. while I was in there I noticed the rubber friction wheel is all chewed up. I have the replacement but can't get the 3 inside screws to loosen up on the part that holds the rubber. There is no room for a socket.

Read More
boscru6469 -
January 14, 2011
A:

I have provided you with the instructions for replacing the friction wheel out of the manual. I have found the best way to remove the bots in the friction wheel is with a ratchet wrench. The socket and ratchet is usually too big to fit. If you do not have a ratchet wrench, you have to use a regular wrench.

Read More
Mark T -
Sears Technician
January 14, 2011
A:

I finally got them all free. I soaked them in WD-40 for a while and got them out. Replaced the friction rubber, cleaned everything up and put it all back together. Works fine. Thanks for all your help.

Read More
boscru6469 -
January 14, 2011
See more answers
Q:

Do I need a gasket between the left and right housing parts on my MTD snow thrower? What oil?

A:

Use Loctite 5699 compound to seal the 2 halves of the gearbox together. The lubricant is a good grade of axle grease applied to the gears as they are installed.

Read More
Jimmy K -
Sears Technician
September 24, 2009