Model #E51 HORIZON Elliptical

  • Elliptical Assembly
    3 Results
Find part by diagram >

Question and Answers

Q:

Error Code 51 replaced control board and still not working 41748102701 Kenmore Washer

A:

Since you are looking at the error codes, I assume that you have the tech sheet for that washer. I recommend that you check the error code again. I don't see that error code 51 listed on the tech sheet. To properly read the error codes, I recommend that you cover the Start light and count the number of times that the status lights blink. That will give you the first digit of the error code (which is likely 5 according to your details). Next, cover the status lights and count how many times the Start light blinks. I suspect that the Start light is blinking more than one time between pauses (maybe 6 times). If you see the E56 error code then your washer is experiencing high motor current. Check the drive system and motor according to the guidelines in the tech sheet. Unplug the washer before accessing internal components and replacing parts.

If you need more help, let us know.

Thanks for choosing Sears PartsDirect.

Read More
Lyle W -
Sears Technician
March 09, 2015
A:

You are correct. Any tips on what to check for a high motor current?

Read More
Tommy -
March 09, 2015
See more answers
Q:

Blade brakes 917288570 Craftsman Tractor

A:

Thanks for using SearsPartsDirect.com, and for being a valued member. 

Once the deck is removed, you can easily replace the brake arm. The cam roller is used to disengage the brake when the deck is engaged. Once the arm is attached, install the spring to the arm and the bracket to hold tension on the arm. I have included good photos of a fully assembled brake arm with the torsion spring in place in this post directly below for visual help:





I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
October 07, 2014
Q:

What do error codes E51, E52, E53 indicate? EW30CC55GS2 Electrolux Cooktop

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
I am sorry to hear about the errors you are receiving on the cooktop, I know how frustrating that is to have occur.
The E51, E52, and E53 errors are all related but are referencing the different elements. The error description is 'Element temperature sensor break'. E51 is in reference to Front Left, E52 is in reference to Rear Left, E53 is in reference to Center, and E54 would be for the Right Rear, and E55 would be for Front Right. 
It sounds like the right side is okay, but the left and center elements are in question. The procedure to fix would be to check all the safety thermodisks. Veryify the element temperature sensor is correctly connected to the induction housing, or replace the element if the temperature sensor resistor value is not approximately 1000 ohms at room temperature, or replace the induction module. 
If you would feel more confident have a Sears Home Service technician help assist with the diagnosis/repair, you can call 1-800-349-5071, or click here to be directed to the page to set up service.
Let us know if we can be of any further assistance and thanks for using SearsPartsDirect.com. 

Read More
Jeff Wallace Sr -
Sears Technician
January 14, 2014