Model #E30EW75GPS2 ELECTROLUX Built-In Oven, Electric

  • Control Panel
    3 Results
  • Body
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Cleaning between door glass.

A:

Cleaning between the glass on the Electrolux icon oven can be a tedious job as you will see in the link provided below. I have also provided the link for a parts breakdown which may be helpful while waiting on model number specific information from an expert. If you decide on service, that link is provided below.

Read More
Anna T -
January 25, 2013
A:

Steam and cooking juices do get between the oven glass and is unsightly. I understand wanting to get this cleaned. To clean between the glass, you will have to remove the door. The door is heavy and requires disassembly and reassembly. I do recommend having a technician tackle this job. You can schedule a Sears technician here; Sears Home Services .

If you feel comfortable completing this project, the following instructions and the image below should get you through it.

  1. First, remove the door. See image in link below. Have a thick towel handy to lay the door on. Make notes of order to follow in reassembly.
  2. With the doors removed unscrew the two screws in each of the bottom glass stop. See the parts diagram of the door in the second image below. Note these are small sheet metal screws and you need to be careful when replacing to not strip out the hole. With the glass stops removed lift the top glass off. Ease it out of the top brackets it will come pretty easy.
  3. The next layer can be removed the same way as the top, be gentle if it offers resistance only apply slight pressure to the glass.
  4. The final layer was the hardest to remove. If the side rubber seals are cooked onto the glass it will feel as if something is holding the glass in place. It is only the rubber seal. Slide a paint scraper between the seal and then frame to free it ( use some silicone spray if it is really hard, you will need to reuse the seal). If it is still resistant unscrew the three upper glass brackets. (DO NOT UNSCREW THE TWO SCREWS THAT ARE BETWEEN THE CENTER AND SIDE BRACKETS). Continue to gently work the glass until it comes free.
  5. Clean
  6. Reassemble in reverse order. Refer to notes and replace each as it came apart. If the glass is difficult to seat into the upper brackets, try a wood yard stick between the layer to help align so it will slip into place.

This video is similar to the steps for similar ovens and may help guide you through the process. If further assistance is needed, please reply. Thank you for using Manage My Life.

Read More
Barbara H. -
Sears Technician
January 26, 2013
A:

Here are the images needed.

Read More
Barbara H. -
Sears Technician
January 26, 2013
See more answers