Model #DVLR223GE2WW GE Residential Dryer

  • Backsplash, Blower & Motor
    3 Results
  • Front Panel & Door
    3 Results
  • Cabinet
    3 Results
  • Drum
    3 Results
  • Gas Valve & Burner Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

dryer doesn't dry dvlr223ge2ww

A:

Good morning... I can fully understand your concern regarding this issue. I did locate a link that will discuss this situation in greater detail. Though this link discusses a different model number, the mechanics are likely going to be very similar. Keep in mind that an expert will be responding within the next two business days if not sooner and will likely offer you more information and instruction. I hope this link will help guide you as to what might be wrong with your dryer and have a nice day.

Read More
Henry -
January 31, 2013
A:

Hi, Thanks for contacting ManageMyLife.com. I understand how frustrating it is having trouble with your not working. We are here to help.

There are some items that need to be discovered,
Is there gas to the dryer?
Is there voltage on the yellow wire when measured to the brown and yellow at the motor? Is the igniter functional? Disconnect and ohm it out after unplugging the dryer from the wall.
Is the radiant sensor functional? Disconnect and ohm it out after unplugging the dryer from the wall.
Some words on the operation. Voltage is applied to the valve after passing through the drum outlet and safety thermostats. The voltage goes through the radiant sensor to the igniter, which if the motor is running has a path through the control inlet thermostat and the m1 and m2 motor switch all the way through the door switch to neutral.
If any of the thermostats are open or the radiant sensor or the igniter is open or the motor switch is open there will be no flame. If motor is operating the door switch is functional.
NOTE: Always unplug or de-energize electrical equipment before removing covers or attempting service.

Be careful and wear appropriate hand protection when working around sharp metal parts.

NOTE: Live voltage checks are dangerous, and possibly deadly. Exercise caution at all times. If you are not comfortable working with live electricity I suggest you call an Sears Home Services technician.

Please feel free to let me know if you need further assistance. We are always here to help. Thank you for using ManageMyLife.com. Bill

Read More
Bill__W -
Sears Technician
February 01, 2013
A:

Here is some information.

Read More
Bill__W -
Sears Technician
February 01, 2013
See more answers

Top Parts