Model #DU930PWSS0 WHIRLPOOL Dishwasher

  • Frame And Console Parts
    3 Results
  • Inner Door Parts
    3 Results
  • Tub Assembly Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Dishrack And Water Feed Parts
    3 Results
  • Lower Dishrack Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

What part do i need? DU930PWSS0 Whirlpool Dishwasher

A:

Thank you for choosing sears I would be happy to help you with your dishwasher. Upon researching model DU930PWSS0; it sounds like you may need to replace the electronic control board. The electronic control board runs all dishwasher functions. If the electronic control board is getting voltage but not operating properly, it will only allow you to operate certain features of the dishwasher. I have posted a link below of the electronic control board key#3.

 

I trust that this information will help you, thank you have a great day.

 

Read More
Jeff Wallace Jr -
Sears Technician
October 30, 2014
Q:

DU930PWSS0 Whirlpool Dishwasher Leak DU930PWSS0 Whirlpool Dishwasher

A:

It can be very frustrating when you dishwasher begins to leak. While you are waiting for your expert answer, I did some research on the unit. At this time, I was unable to locate information that would be helpful in regards to your question. Some of these questions that are asked will need specific research and will be answered by an expert with-in two business days but usually sooner.

Read More
Julio -
January 17, 2013
A:

Thanks for contacting ManageMyLife.com. I understand how frustrating it is having trouble with your dishwasher leaking water. We are here to help. The part you need, located on the left side of the tub, is not serviceable. The water inlet hose connects to it. The only solution is, to replace the dishwasher. I hope this helps.

To purchase a new dishwasher visit sears.com .

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Read More
John H -
Sears Technician
January 19, 2013
See more answers
Q:

I have a du930pwss0 dishwasher.

A:

A Dishwasher is definitely something we depend and when starts malfunctioning it can be a big inconvenience. I have attached a link below well you are waiting for an expert to reply,that give great information on way this may be happening. Hope it helps!

Read More
Priscilla V -
July 18, 2011
A:

Hi Scott,

Thank you for submitting a question to Manage My Life.

I am sorry you are having problems with your dishwasher.

The first thing I recommend checking is the float on the overfill switch. If it is getting stuck your dishwasher will not fill. Other than that, you most likely have a control board issue. The remaining checks will require the use of an ohm/volt meter and you will have to perform ohm checks and/or live voltage checks. If you have a meter and are confident in your ability to safely perform these checks, reply to this post and I will be happy to assist you in any way I can.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

If I may be of further assistance as more details become available, please reply to this post.

Thanks again for using Manage My Life.

Landell

Read More
Landell -
Sears Technician
July 19, 2011
A:

yes I have a meter and know how to use it.

Read More
scott -
July 19, 2011
A:

Hi Scott, Here is the entire service cycle diagnostics and wiring diagram. You will need to run the service cycle and determine what component is not functioning. Once this has been established, you can manually close the door switches and check voltage to that component from the control board. If you have voltage at the control board check it again at the component. This will help you determine whether it is a control issue, wiring issue, or a component issue. If all components work in the service cycle, you have a programming issue with the control. Please perform the diagnostic tests detailed here and report back with your findings. I am looking forward to assisting you again in the near future. Thanks again for using Manage My Life. Landell

Read More
Landell -
Sears Technician
July 21, 2011
See more answers

Top Parts