Model #DU930PWPT2 WHIRLPOOL Dishwasher

  • Frame And Console Parts
    3 Results
  • Inner Door Parts
    3 Results
  • Tub Assembly Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Dishrack And Water Feed Parts
    3 Results
  • Lower Dishrack Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Whirlpool dishwasher DU930PWPT2 is not dispensing rinse aid. Thank you for a breakdown of the parts and process needed to be fully examined to diagnoise for

A:

Sparkling clean dishes is what all of us look for when we take the dishes out of the dishwasher. The rinse aid is key so I can see this would be a problem. I attached a link to the owner's manual and another to the parts diagram that may prove helpful while you wait for the expert response.

Read More
Barbara H. -
January 19, 2012
A:

There are two possible causes for this problem.

The first may be mechanical. See the first image and notice the spring and latch. The front panel can be removed to check if either is broken or jammed.

The 2nd possible cause is electrical. The dispenser wax motor or control may be the cause of the dispenser not opening. The wax motor can be checked for resistance if a meter is available. Remember to turn the power off first.

The control may be the cause but most likely the wax motor or a spring has failed.

I hope this helps. You can reply with any additional details for further assistance.

Read More
Fred M -
Sears Technician
January 21, 2012
See more answers

Top Parts