Model #DU1100XTPQ3 WHIRLPOOL Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

MY DISHWASHER LEAKS DU1100XTPQ3 Whirlpool Dishwasher

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your dishwasher. Upon researching modelDU1100XTPQ3; check to make sure all the parts where fully seated when re assembled. Check to see exactly where it’s leaking and see if there is a gasket or damaged part. I linked the diagram below.

Thank you for choosing Sears. We appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
November 03, 2014
Q:

Why my Whirlpool Dishwasher does not clean properly anymore

A:

Dishwashers are one of the best labor savings devices made but when the dishes come out dirty, it can create more labor. I wouild suggest adding the complete model number to help the expert provide the best answer possible. In the meantime, I did locate two videos and a similar question that may help. I attached the links below. I hope this information helps keep your hands out of the sink.

Read More
Barbara H. -
March 16, 2012
A:

Thank you for submitting a question to Manage My Life.

Some general things to check are:

  1. At the end of the cycle when the dishwasher finishes the dishes should be almost too hot to touch. If the dishes are not hot at the end then the water heat function in rinse is not working. If the dishwasher does not heat the water it will not clean well.
  2. Check the water level after it has run a few minutes. If there is a siphon problem the water will drain out as the dishwasher washes.
  3. Check for suds in the water. Most dishwasher soaps have rinse agent added and the dishwasher dispenses rinse agent so suds in the water is a possibility and excessive suds can cause poor cleaning.
  4. The dishwasher needs to drain completely. If the dishwasher does not drain then the rinse can be with soapy water and leave a film on the dishes.
  5. If some items are clean and some are not then it may be a spray arm or circulation problem. You can place cups in all 4 corners of the racks top and bottom to see it they all get the same amount of water. Let the dishwasher fill and wash for about 5 minutes and then slowly open the door to check.


If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website; Sears Home Services .

Here is a link that you may use to view the parts list diagram or to purchase any parts needed; Sears Parts Direct .

I hope this is helpful. Check the things I have covered here and if I may be of further assistance please include more details in a reply to this post.

Landell

Read More
Landell -
Sears Technician
March 17, 2012
A:

HERE IS THE TYPE OF WHIRLPOOL DISHWASHER IT IS: 575-0 Model: DU1100XTPQ3 Tried to see if has the particle catch inside but does not appear to have one.. Just a screen around the spinner that is barely one remotely blocked. The other ideas wonder is if the switching buttons on the door is messed up. Or if some water heater part is not warming the water high enough. THIS IS THE TYPE that has a version of a food grinder built into it. And has not given any kind of trouble until the past weeks to near a month. USE the kind of dish soap required its entire time. Have tried some streak cleaner at times. But not on a regular basis either. Appears to have only one water supply line so it must heat up the water itself. DID a self check to see if a screen may be present in the water supply line and noted nothing like that blocked. Had that water line off and turned on the supply to see plenty of water should go to the dishwasher. ANY MORE IDEA's or CLUE's would help out THANKS

Read More
Anonymous -
March 17, 2012
A:

Hello,

The first thing I recommend checking is the filter and sump assembly. I am including a video below that should help with this. Also check the things I gave you in my last post. This dishwasher should be connected to a hot water line with a minimum of 120 degree water.

Check the things I have covered here, and if I may be of further assistance include more details in a reply to this post.

Landell

Read More
Landell -
Sears Technician
March 19, 2012
See more answers

Top Parts