Model #DU1055XTVS1 WHIRLPOOL Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Fill, Drain And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Heater Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Lower Rack Parts
    3 Results
  • Lower Washarm Parts
    3 Results
  • Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Cycle stops after first fill DU1055XTVS1 Whirlpool Undercounter dishwasher

A:

Thank you for your inquiry on your Whirlpool Dishwasher, Model: DI1055XTVS1.  From reviewing the details on your model, if the wash motor will operate in the first wash but not operate in the 2 and 3 wash cycles could indicate a faulty wash motor or control board. The wash motor could be shutting off be the thermal overload protector inside the motor. The only way to know which is faulty will require monitoring the voltage supply at the wash motor across the White and Blue wires connected to the wash motor. These wires can also be accessed at the control board as well for testing the voltage supply to the wash motor.

 

Safety Warning: Before beginning the repair, disconnect the direct power supply to the dishwasher to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
April 07, 2015

Top Parts