Model #DU1055XTPQ3 WHIRLPOOL Dishwasher

  • Door/panel
    3 Results
  • Control Panel
    3 Results
  • Door/latch
    3 Results
  • Lower Washarm
    3 Results
  • Heater
    3 Results
  • Fill/overfill
    3 Results
  • Tub/frame
    3 Results
  • Pump/motor
    3 Results
  • Upper Rack/track
    3 Results
  • Upper Wash/rinse
    3 Results
  • Lower Rack
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

My dishwasher won't properly wash my dishes well. DU1055XTPQ3 Whirlpool Dishwasher

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dishwasher. Upon researching model DU1055XTPQ3; I found some information in the owner’s manual. The information is on page 21 under dishes are not completely clean. If that does not apply then it could be the holes in the spray arm have built up calcium or sediment.

Thank you for choosing Sears. We appreciate your business. Have a great day.

 

Read More
Jeff Wallace Jr -
Sears Technician
December 04, 2014
Q:

Whirlpool Dishwasher DU1055XTPQ3

A:

I know that it can be very frustrating to have issues with your dishwasher. From what you are describing, it sounds like the panel has no power to it. You did not mention if any of the lights were working or not. If this is the case, then the control board is the issues. In order to be sure you will need to test the L1 and L2 connections to see if the board is getting power. You will need an ohm/volt meter to do this and you will be looking for 120 vac. Also, check the power to the outlet with the meter as well. It is possible for the outlet to be the issue as well. If you don't feel comfortable doing this yourself, please click on the link to schedule service: Sears Home Services. Click on "Get Started" and follow the directions, click on the red "NEXT" button to continue. I hope this helps. Please feel free to let me know if you need further assistance. We are always here to help. Thank you for using ManageMyLife.com.

Read More
AnneJ -
Sears Technician
September 02, 2013
Q:

my wash drying and clean buttons do not come on when cycle is running model # DU1055XTPQ3 dishwasher

A:

I did some research on the dishwasher and I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within two business days with detailed information. Thank you for using Manage My Life.

Read More
Joseph P. -
January 02, 2013
A:

This sounds like the control touch panel is the problem. You can order a replacement here; Sears Parts Direct .

I highly recommend having a technician diagnose and replace this part if needed. He will be able to check all the wiring to confirm it is the control panel. You can schedule a Sears technician here; Sears Home Services .

If you decide to proceed yourself and need further information, please reply. Thank you for using Manage My Life.

Read More
Barbara H. -
Sears Technician
January 04, 2013
See more answers

Top Parts