Model #DRTL25060 HEALTH RIDER Treadmill

  • Unit Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

I have a soft strider treadmill model DRTL25060. The treadmill turns on, but when the belt starts moving it shuts off.

A:

This symptom is usually because the console is not receiving information from the speed sensor on the treadmill. The console does not sense movement from the motor or walking belt so it turns the motor off.

Remove the motor hood from the front of the walking belt and look at the motor. On the back end of the motor shaft is a small disc that rotates inside an optic sensor.

Look for the disc or sensor to be out of position or the disc has worn into the sensor.

Read More
Jimmy K -
Sears Technician
September 21, 2009

Top Parts