Model #DPGT750EC1WW GE Residential Dryer

  • Controls & Top Panel
    3 Results
  • Cabinet, Front Panel & Door
    3 Results
  • Drum, Blower & Motor
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

GE Electric Dryer Model DPGT750EC1WW acts like no power DPGT750EC1WW Ge Electric dryer

Q:

Is there a way I can test the Display ASM to be sure I am ordering the correct part?

A:

Having a properly working dryer is very important. I found some information that I am hoping will help you with the dryer. Please click here:[Display ASM]. Your expert will also help answer your question. It may take two business days for your expert to reply. I do hope that everything works out.

Read More
Marc -
June 05, 2013
A:

I know that it can be very frustrating to have issues with your dryer. The information that you need to diagnose and repair this is very complicated. The testing information and the disassembly procedures are located in the service guide beginning on page 20. If you would like to download a copy of this, please click on this link: Service Guide. I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
June 07, 2013
A:

?

Thank you for your question.Before we start replacing parts would you please try this.Check to see if you are getting 240 from the wall then 120 should be present at CN10 then there should be 5V dc on pin 3 and 7 on CN11.

The manual further explains this 5V is used to power the LCD in a standby mode, waiting for a keypress.

When a key or the LCD is pressed you should get 12 VDC and 20 VDC on two other pairs of wires.

"-Press BACK & MY CYCLE buttons at the same time for 15 seconds. This will wake up the display but with a statement that there is something wrong, and give you a GE phone number.

-Press Power, then Help, then both My Cycles & Back at the same time for 3 seconds, then EXIT from the LCD screen.
your display will tell what is wrong. now press MORE until you get to NEW DRYER SETUP button. press it and follow through the new dryer setup process. Now check to see if that worked.

We have a phone number called sds Kenmore connect when you call this number you will be asked to put your phone to the control panel the phone number is

888-248-1571.to do a connect repair by phone. I hope this helps. Reply to this post if you have anymore questions. Thank you for choosing Manage My Life.

Read More
dtova00 -
Sears Technician
June 08, 2013
See more answers
Q:

Why won't my model DPGT750EC1WW GE electric dryer heat?

A:

You don't include many details about your problem other than the dryer does not heat. If this dryer is running but not heating you should get an error code to indicate what the dryer thinks is wrong.

If the dryer is running but not heating first I recommend you check the circuit breakers. It's possible for an electric dryer to loose one leg of the 240 volts so that it has 120 volts to run but no 240 volts to heat with.

Locate and flip the breakers off then back on to check for this problem.

The drum must be rotating. If the belt is broken then that can cause the dryer no to heat.

The image below contains the instructions for entering the diagnostic and you can try this to bring up any error codes that are in history.

This information should help narrow the causes of your not heating problem down. Try these suggestions and submit another question with any additional details for further assistance with this problem.

Read More
Fred M -
Sears Technician
May 12, 2009

Top Parts