Model #DLG8388WM LG Residential Dryer

  • Control Panel/plate Assy
    3 Results
  • Cabinet/door Assy
    3 Results
  • Drum/motor Assy
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How do I replace a Flame Sensor on the LG Trom Model DLG8388WM? DLG8388WM Lg Dryer

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your dryer and I do understand your frustration. Glad to help out. I'm looking at your model number dlg8388wm and here is a link for a video that may help with the repair. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
December 08, 2014
Q:

How do I replace the Igniter on the LG Dryer model DLG8388WM? DLG8388WM Lg Dryer

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you in locating the instructions to replace the ignitor in your dryer. 

Click here for videos. 


You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
December 04, 2014
Q:

How do I replace the thermostat and safety thermostat on an LG TROMM DLG8388wm gas dryer?

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Alina -
January 26, 2013
A:

Hi,

Thank you for asking this question and allow me to answer it this way.

The dryer will have to have the front panel removed and the gas valve is sitting on the right hand side of the bottom part of the cabinet. I will send you a picture of the location and the position of the gas valve and the burn tube.

I hope this answer is useful and that it helps you correct the problem with your appliance.
Thank you for using ManageMyLife.

Read More
Bill__W -
Sears Technician
January 28, 2013
See more answers

Top Parts