Model #DLG2051W LG Residential Dryer

  • Control Plate And Panel Parts
    3 Results
  • Cabinet And Door Parts
    3 Results
  • Drum And Motor Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Gas valve opens without ignitor lighting. DLG2051W

A:

The problem with the dryer is concerning. I found some information for you that I am hoping will be able to help you. I am adding the link below to help you with your question while you wait for your expert response. It may take two business days for your expert to respond. I do hope that this will help you with the dryer.

Read More
Marc -
January 28, 2013
A:

I did not receive the link.

Read More
Stephen B -
January 28, 2013
A:

Hi,

Thank you for asking this question and allow me to answer it this way.

Check the voltage off the board to the igniter.
Step 1 is a call for heat at the board.
Step 2 is valve 1 is energized with DC voltage 90 VDC.
Step 3 is igniter voltage to the ignitor, the the yl3 connector is good for lots of checks p1 to p2 checks the flame detector for being closed. Closed will be 0VAV yl3 p3 to bl2 p1 should be 120 Vac. If not use yl3 p 2 to bl2 p1 if not 120 Vac check black tap relay blue to bl2 p1 should be 120 vac

NOTE: Always unplug or de-energize electrical equipment before removing covers or attempting service. Be careful and wear appropriate hand protection when working around sharp metal parts.

NOTE: Live voltage checks are dangerous, and possibly deadly. Exercise caution at all times. If you are not comfortable working with live electricity I suggest you call an Sears Home Services technician.

I hope this answer is useful and that it helps you correct the problem with your appliance.
Thank you for using ManageMyLife.

Read More
Bill__W -
Sears Technician
January 29, 2013
A:

Here is the diagram

Read More
Bill__W -
Sears Technician
January 29, 2013
See more answers
Q:

How do I access the burner assembly on my LG gas dryer. I need to install the LP gas conversion kit.

A:
Joey S -
Sears Technician
June 09, 2010

Top Parts