Model #DLB2450BEL HOTPOINT Residential Dryer

  • Backsplash For Dlb6850bel Only
    3 Results
  • Backsplash For Dlb2450bel Only
    3 Results
  • Cabinet And Top
    3 Results
  • Backsplash For Dlb2650bgl Only
    3 Results
  • Cabinet Front
    3 Results
  • Backsplash For Dlb1550bel Only
    3 Results
  • Drum And Heater Assembly
    3 Results
  • Blower And Drive Assembly
    3 Results
  • Backsplash Dlb1250bdl Only
    3 Results
Find part by diagram >

Question and Answers

Q:

How do I access belt on Hotpoint dryer?

A:

Thank you for your question.  To access the belt you will need to raise the top panel and remove the front panel.    To raise the top panel open the door and remove the 4 screws holding the top panel.  Raise the panel.  Remove the two 5/16 bolts holding the top of the front panels.  Pull out and up on the panel to remove it.   Remember to unplug the washer.   You will have to work by feel at this point.  If the drum is needed to be removed then you will need to remove the small square panel in the middle of the rear of the cabinet.  Behind the square panel you will need to remove the c-clip holding the drum.  With the clip removed you can pull out on the drum to remove it.  I hope this helps.  You can reply below with any additional details for further assistance. 

Read More
Fred M -
Sears Technician
November 20, 2013

Top Parts