Model #DISPLAY 900 SMITH CORONA Typewriter

  • No Image Available - Wards
    3 Results
Find part by diagram >

Question and Answers


Technical help with Kenmore Elite refrigerator


Problems after a lightning strike can cause a lot of grief. I located a link that may help while you wait for the expert. I attached to the link below. I hope this helps.

Read More
Barbara -
August 10, 2012


Thank you for your question. It is concerning when the refrigerator is not functioning correctly. So the code is Pe 000 in the display. The main control board needs to be programmed for your model number. On the serial number plate is a 3 digit code and this will need to be programmed in to the display. It is like programming a computer. Let me explain that you will start with 000 and you use the Refrigerator temp up or down to change the first 0 to whatever, 9 lets say. Display is now 900.
Now use the freezer UP button to move to the next 0 and change it using the refrigerator temp. up or down button to 9 lets say now the display looks like 990.
Use the freezer UP button to change the last 0 and use the refrigerator up or down button to change the last 0 to lets say 9. Now the display looks like 999.
Now press and hold the freezer DOWN button until the code blinks off and on. If it beeps there is a problem but if it just flashes, just close the fresh food door. Wait a few seconds and open the door and set the temperatures. No problem right. Just go slow and remember field technicians have programming problems with this. Good Luck.

I hope this is helpful. If I may be of further assistance please include more details in a reply to this post.

Read More
Bill__W -
Sears Technician
August 11, 2012
See more answers