Model #DGAA056BDTA COLEMAN Furnace/Heater, Gas

  • Furnace
    3 Results
Find part by diagram >

Question and Answers

Q:

ignition problem DGAA056BDTA Coleman Furnace

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your air conditioner and I do understand your frustration however we do not offer technical advice on heating and cooling units. Please contact a Sears Home Services specialist for more information. If you have further questions please resubmit your question for further information. I hope this information helps you.
 
Thank you for choosing Sears PartsDirect.com.
 
SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others. 

Read More
Sherman_G_Wallace -
Sears Technician
October 14, 2014
A:

Furnace won't ignite at all

Read More
Harold -
October 03, 2015
A:

Furnace won't ignite at all

Read More
Harold -
October 03, 2015
A:

Furnace won't ignite at all

Read More
Harold -
October 03, 2015
See more answers
Q:

DGAA056BDTA - Heater function works fine, no cooling with AC DGAA056BDTA Coleman Furnace

A:

You did not mention if the Outdoor unit is running or not. The outdoor unit has a compressor and condensor fan motor that must operate in order to cool. If the outdoor fan is running but the compressor isn't, the contactor could be bad or it could have locked compressor or a burnt or loose wiring connection. Be sure and disconnect the power to the outdoor unit before checking for burnt wires. 

I recommend calling a service technician to  diagnose and repair your Central A/C. 

Read More
Joey S -
Sears Technician
August 17, 2015
A:

You did not mention if the Outdoor unit is running or not. The outdoor unit has a compressor and condensor fan motor that must operate in order to cool. If the outdoor fan is running but the compressor isn't, the contactor could be bad or it could have a locked compressor or a burnt or loose wiring connection. Be sure and disconnect the power to the outdoor unit before checking for burnt wires. 

I recommend calling a service technician to  diagnose and repair your Central A/C. 

Read More
Joey S -
Sears Technician
August 17, 2015
See more answers
Q:

Burner runs but no heat DGAA056BDTA Coleman Furnace

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your air conditioner and I do understand your frustration however we do not offer technical advice on heating and cooling units. Please contact a Sears Home Services specialist for more information. If you have further questions please resubmit your question for further information. I hope this information helps you.
 
Thank you for choosing Sears PartsDirect.com.
 
SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others. 
 

Read More
Sherman_G_Wallace -
Sears Technician
December 29, 2014

Top Parts