Model #DG810 MAYTAG Residential Dryer

  • Control Panel
    3 Results
  • Front View
    3 Results
  • Rear View
    3 Results
  • Front Panel & Door Assembly
    3 Results
  • Lint Screen, Tumbler (front & Back)
    3 Results
  • Inlet Duct, Gas Valve, Cone & Extension
    3 Results
  • Motor, Blower, Base Frame & Thermostats
    3 Results
  • Installation Accessories
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How do I light the pilot on my Maytag gas dryer?

A:

Your dryer does not have a pilot light, it uses an electronic glow bar igniter that glows red hot that ignites the gas. There are several electrical components that must be in working order before the glow bar igniter will be allowed to glow. There are other components that must be in working order before the burner gas valve will open too. With this said, your dryer will require some testing with a volt/ohm meter in order to diagnose the failure.

I recommend calling a service technician to diagnose and repair your gas dryer. I also added the theory or operation in the link below.

Why won’t the igniter glow on my gas dryer?

Read More
Joey S -
Sears Technician

Top Parts