Model #DE8500 MAYTAG Residential Dryer

  • Control Panel
    3 Results
  • Front View
    3 Results
  • Rear View
    3 Results
  • Front Panel & Door Assembly
    3 Results
  • Lint Screen, Tumbler (front & Back)
    3 Results
  • Motor, Blower, Base Frame & Thermostats
    3 Results
  • Thermostats
    3 Results
  • Installation Accessories
    3 Results
  • Inlet Duct & Heater Assembly
    3 Results
  • Inlet Duct & Heater Assembly (series A3)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How to route the belt around the drum for a Maytag DE 8500 dryer, and how to remove the top?

A:

I assume you have the front panel off. If you don't have the front panel off, it must be taken off before you can access the screws holding the top to the side panels. To remove the front panel, remove the two screws located at the bottom of the front panel. Tilt the bottom of the front panel outwards about 35 degrees and the front panel will disengage at the top and drop down and off.

I added the instructions in the image below how to route the belt.

Read More
Joey S -
Sears Technician
July 10, 2009

Top Parts