Model #DDE8509RCMWW GE Residential Dryer

  • Backsplash/blower And Drive
    3 Results
  • Front Cabinet/inner, Door Panel
    3 Results
  • Side Panel/top Cover
    3 Results
  • Drum/heater/housing
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

When you set temperature on the dryer, the temperature setting works, but it does not shut off.

A:

Providing a model number would definitely help an expert better your search. If you would like to resubmit your question I would be more than happy to assist you. Have a great day!

Read More
Alina F. -
November 14, 2010
A:

I understand your concern and I must assume you mean the timer does not advance at all or it advances near the end of the cycle but will not advance to OFF.

There could be a few different reasons why the timer is not advancing depending on the model number. It could have a faulty timer, failed power resistor, shorted moisture sensor bars, thermostat failure or possibly just a loose wire connection.

Reply with the model number and additional details for model specific troubleshooting assistance.

Read More
Joey S -
Sears Technician
November 16, 2010
A:

Sorry for not getting back sooner. The GE model is DDE8509RCMWW, S/N 2G412384A

Read More
Greg -
November 21, 2010
A:

Thanks for replying with model number of your dryer. I do not clearly understand the symptom. I do not know if you�re implying the heat does not cycle off and it gets too hot or if the timer is not advancing. If the dryer is overheating, it could have a shorted heating element or a faulty thermostat. If the timer does not advance at all in "TIME" or "Automatic" the timer is has likely failed. If the timer advances in "Time" dry, but not in "Automatic" the power resistor has likely failed. Reply with additional details so that I can get a full and clear understanding of the symptom/failure for specific troubleshooting assistance.

Read More
Joey S -
Sears Technician
November 22, 2010
A:

It does not cycle off, since the timer is not advancing..

Read More
Greg -
November 24, 2010
A:

Are you using TIME dry or Automatic dry cycles? If it's not advancing in the auto cycle then it could have a faulty power resistor. If it does not advance in Time dry or Auto dry then it could have a faulty timer. Reply with additional details for further assistance.

Read More
Joey S -
Sears Technician
November 24, 2010
See more answers