Model #DBXR463PG7WW GE Residential Dryer

  • Backsplash, Blower & Motor Assembly
    3 Results
  • Front Panel & Door
    3 Results
  • Cabinet
    3 Results
  • Drum
    3 Results
  • Gas Valve & Burner Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

dryer dont heat up? DBXR463PG7WW Ge Gas dryer

A:

Thank you for your inquiry on your Ge Dryer, Model: DBXR463PG7WW. From reviewing the details on your model, I have provided a link to a couple of videos on similar models of dryers, which should be able to trouble shoot what could be causing the dryer to stop heating.

Click Here

Safety Warning: Before beginning the repair, disconnect the direct power supply to the dryer to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663.

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
April 30, 2015
Q:

Dryer do all cycles but dont heat up? DBXR463PG7WW Ge Gas dryer

A:

Thank you for your inquiry on your Ge Dryer, Model: DBXR463PG7WW. From reviewing the details on your model, the first thing you should check is the house circuit breakers or fuses for the dryer outlet. The dryer will run if only one of the 120 volt legs of 240 volt power is supplied to the dryer. If the second leg of 120 volt power is missing, the dryer will not heat. If the breakers are okay, you can check the outlet using a volt/ohm meter. The image below shows a diagram that will help you check that outlet voltage.

NOTE: You should only check that live outlet voltage if you are completely confident in your technical ability to safely measure it. Wear proper safety equipment (electrical safety gloves and safety goggles) when checking that live outlet voltage.

Next I would suggest that you carefully "bypass" the heat relay on the control board. To do this, unplug the dryer and gain access to the control board and find the heat relay. It has a black wire and a red wire going to it. Take these wires off the control and tape them together so no bare metal shows on the wire ends. Plug the dryer back in and start a heat cycle. If it heats the control is bad. 

Safety Warning: Before beginning the repair, disconnect the direct power supply to the dryer to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663.

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
April 25, 2015
A:

Just to reminded you, this dryer is 120v and is a gas dryer, not a 240v

Read More
wilfredo -
April 26, 2015
See more answers

Top Parts