Model #DBXR463GG8WW GE Residential Dryer

  • Backsplash, Blower & Motor Assembly
    3 Results
  • Front Panel & Door
    3 Results
  • Cabinet
    3 Results
  • Drum
    3 Results
  • Gas Valve & Burner Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Dryer Flooded

A:

I know how important it is to have a good working dryer in the home so that you can dry your freshly washed clothes. While you are waiting for your expert answer, I did manage to find a link that will provide you with some good information to help your with your question. I hope my link is useful.

Read More
Joseph P. -
August 31, 2011
A:

The burner assembly could have been damaged during that flood. I recommend that you have a service technician examine the dryer before you attempt to use it. You could have a short in the wiring that could cause a dangerous situation. Here is a link for the Sears Service website: Sears Home Services .

If you are certain that there are no shorts in the wiring and you want to diagnose and repair this problem yourself, I recommend that you check to see if the igniter on the gas valve is glowing when the dryer is running in a heated circuit. The image below shows how to check that igniter. If that igniter is not glowing, it may need to be replaced. You could also have a bad safety thermostat or a wiring failure that would prevent the igniter from glowing. You can order parts from the Sears PartsDirect website if needed.

Reply with additional details if you need more help with this failure.

Read More
Lyle W -
Sears Technician
September 02, 2011
A:

Dryers have fuses just like any other electrical device that has circuit guard. Some dryers only have one fuse, while others have separate fuses for the motor, heating element and panel switches. Emergency document drying service Florida

Read More
maxie -
August 24, 2012
A:

Thanks for posting that additional information Maxie. You are generally correct about the fuses in most dryers. This particular model has safety thermostats instead of fuses. Those components will reset instead of blowing and then needing to be replaced.

Read More
Lyle W -
Sears Technician
August 25, 2012
See more answers

Top Parts