Model #DBXR463EG0WW GE Residential Dryer

  • Backsplash, Blower & Motor Assembly
    3 Results
  • Front Panel & Door
    3 Results
  • Cabinet
    3 Results
  • Drum
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Dryer making loud squeaking and grinding noises. DBXR463EG0WW Ge Electric dryer

A:

Thank You for choosing Sears PartsDirect.com. I regret to hear that you are having issues with your dryer and do understand your frustration. Glad to help out. Im looking at your model number DBXR463EG0WW and usually if you are getting noises from dryer you will want to look at the shaft and bracket assembly(#508 in the diagram) and the sleeve(#3106) and also retainer(#3102). These are the items that are more than likely making all the noise. I have included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page. If you have further questions please resubmit your question for further information.
 
 
Thanks for choosing Sears PartsDirect.com.
 

Read More
Sherman_G_Wallace -
Sears Technician
March 21, 2014
Q:

What do I need to replace for working dryer time settings? DBXR463EG0WW Ge Electric dryer

A:

Your symptoms indicate that the timer motor in the console is not working. To fix that problem, you will need to replace the timer (part WE4M383). Unplug the dryer before accessing internal components and replacing parts.

 

If you need more help, let us know. 

Read More
Lyle W -
Sears Technician
November 06, 2013
Q:

GE dryer model #DBXR463eg0ww. Starts without using the "start" switch, why?

A:

I'm sorry to hear that you are having some difficulties with your Dryer. I did some research for you at Managemylife.com and found expert answers to similar questions that may help until your expert can respond to your specific question. The links are attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com. I hope these links provided assist you.

Read More
Priscilla V -
November 29, 2011
A:

The push to start switch (WE4M519) is likely faulty. You could test it by disconnecting the wires from the push to start switch and see if it starts when the power cord is reconnected. NOTE : Disconnect the power cord from the power source before accessing and disconnecting the push to start switch. You should be able to access the push to start switch by removing the panel from behind the console. Be sure and tape the spades connectors on the wires so that they won't short to ground or position them so they can't touch any metal or any other wires and then plug the dryer in and see if starts. If it doesn't start, replace the push to start switch. If continues to start then it may have wire shorted to ground between the push to start switch and the motor. If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services . I hope this helps.

Read More
Korinna S -
Sears Technician
November 30, 2011
See more answers

Top Parts