Model #DBLR333ET1WW GE Residential Dryer

  • Control Assembly
    3 Results
  • Cabinet & Top
    3 Results
  • Cabinet Front
    3 Results
  • Drum, Heater Asm., Blower & Drive Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


Why is my GE dryer not stopping at the end of the cycle?


On this symptom if the resistor & harness at the resistor checks good then you will need to replace the timer. The resistor should ohm out at 4500 ohms. WE4X799 resistor, WE4X882 timer.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
biker dave -
Sears Technician
March 24, 2010

Top Parts