Model #CSG9000 PIONEER Speakers

  • No Image Available - Fidelitone
    3 Results
Find part by diagram >

Question and Answers

Q:

What is it called and where can I get one?

A:

I can understand your concern over wanting to obtain the part for your Maytag cooktop. I did some research and provided a link to the parts list for your specific model. I hope this will help you until the Expert responds to your question in more detail within 24 to 48 hours.

Read More
Julio -
October 11, 2012
A:

Thank you so much , I appreciate it. That's where I had asked earlier and they tried helping me but they gave me a link to this website instead. im hoping an expert can solve my dilema.

Read More
Yasmin -
October 11, 2012
A:

Thanks for your inquiry about the Maytag cook top, I will be glad to help with this question.
Under the knob is the valve that supplies gas to the burner. I have researched this and find the part no longer available. I suggest you try removing a working knob from the shaft and try it in place of the non-working one. Sometimes the knobs themselves will break internally and not allow the correct movement of the valve stem. If this works then you just need to order a new knob. I will attach the link again for parts; Sears PartsDirect
I hope this works for you, if I can be of more assistance please reply with any details.

Thanks Ron H.

Read More
Ron H -
Sears Technician
October 12, 2012
See more answers
Q:

Why is my gas cooktop making the clicking sound as if I was attempting to ignite one the burners?

A:

Having the cook top working differently then how you want it to can be challenging. I was able to find a great link that i hope it helps to solve your problem. http://www.managemylife.com/mmh/questions/197716-why-does-one-of-the-burners-on-my-cooktop-keep-clicking-like-its-trying-to-light-when-i-try-and-shut-it-off

Read More
celene -
November 07, 2010
A:

Make sure that all of the burners are completely turned to the OFF position.

If all of the burners are off, then your symptoms indicate that one of the burner switches is likely stuck in the closed (light) position. You will likely need to have a service technician repair this type of problem. Here is a link for the Sears Service website: Sears Home Services .

To diagnose and repair this type of failure yourself, you would need to unplug the cook top or shut off the circuit breaker to completely disconnect electrical power. Next, you would need to pull the cook top out of the counter and access the valve switches. Disconnect the black wire(s) from one switch and tape the bare lead with electrical tape. Reassemble the range and power it back up to see if the igniters constantly tick. If they do then you will need to unplug the cook top (or shut off the breaker) and replace the wires on the first switch that you checked. Move on to check the next switch. Pull the black wire(s) off and tape them the bare lead with electrical tape to keep it from shorting to the metal frame of the cook top. Reassemble and test the range. Continue this process until you isolate the bad switch. Once you find the bad switch, you can replace it. You can order parts from the Sears PartsDirect website. The part number for the burner switch is 7403P367-60.

If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
November 08, 2010
See more answers