Model #CRG8600AAL MAYTAG Free Standing, Gas

  • Control Panel
    3 Results
  • Top Assembly
    3 Results
  • Body
    3 Results
  • Oven/base
    3 Results
  • Gas Controls
    3 Results
  • Door/drawer
    3 Results
Find part by diagram >

Question and Answers

Q:

My maytag range model number CRG8600AAL is beeping loudly and displaying the message F-I.

A:

Well something that would have this kind of information will be in your owners manual. I know exactly how hard it is to keep track of all the owners manuals in your home but something that is very handy about Manage My Life is that you can find just about any manual on here. All you have to do is go to the top of the page and click on the tab that says "MANUALS" in the search box type in your model number then you manual will be available for you to view. I have attached the link below for you to view while waiting on your response from an expert. Hope this helps!

Read More
Alina F. -
August 28, 2010
A:

The "F1" fault code implies a faulty oven sensor or it could imply a failed oven control board. In order to diagnose which will require disconnecting the oven temperature sensor from inside the oven cavity and measuring the resistance using an ohm meter. The oven temperature sensor probe should measure approximately 1100 ohms at room temperature. If the oven temperature sensor probe measures approximately 1100 ohms then the oven control/clock assembly will need to be replaced. The oven sensor is located protruding through the back wall of the oven cavity. If there are no visible screws securing the temperature sensor then you will have to slide the range out and access it from the back of the range. NOTE: Disconnect the power cord from the power source before removing the rear panel and removing the oven temperature sensor probe. The part number of the temperature sensor is 12001655. The clock/oven control is part#7601P222-60.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
August 30, 2010
See more answers