Model #CF2800 PORTER CABLE Air compressor

  • Twin Cylinder Compressor
    3 Results
Find part by diagram >

Question and Answers

Q:

are acg-402 and z-acg-402 interchangeable?

A:

Part #z-acg-402 valve plate assembly will not substitute to part #acg-404 valve plate. There is no original or substitute valve plates available for your model compressor.

Read More
Joey S -
Sears Technician
June 11, 2010
A:

Although the ACG-402 is no longer available, you can use the Devilbus part number Z-AC-0032 along with two Devibus cylinder heads, AC-0805 and AC-0784. If you have all the parts for the old ACG-402 valve plate, you can order the Z-AC-0032 valve plate and just swap the reed valves. However, when I saw how the valve plate had been changed, I really liked it and spent the extra bucks to put the new cylinder heads on. The Devilbus compressor CF2800 is one of the compressors that use the parts above.

Read More
victor42 -
June 29, 2010
A:

You can find the reed valves at allparts. They have several models but I'm just linking one. http://www.allpartsinc.com/ProductDesc.aspx?code=A00717&type=0&eq=

Read More
Susan -
December 27, 2014
See more answers
Q:

I have air compressor mod 919152920 won't build pressure

A:

It can be very frustrating when the main purpose of a tool just gives out. I have taken some time to further your search here on Manage My Life and I noticed that someone else had asked similar questions with a posted response from an expert. I have attached the link below if you are interested in viewing the web page so you can get an idea of what is going on with your air compressor while waiting for an expert response. Hope this helps, have a wonderful day!

Read More
Alina F. -
September 05, 2010
A:

Thank you for your question.

• I most cases if the motor runs freely, there are not any air leaks, and it will not build pressure I believe that it is the sleeve and piston ring kit.

The reed plate, O-ring seals could have also failed.

• The only way you will know for sure is the take the head off the look at the reed valve and the o-rings and the piston and sleeve.

• This is a dry slide lubrication system and it will wear out and you replace the components as a complete assembly. This is a very simple system to repair and most people with a little mechanical ability can service this pump assembly.

• Ordering part number kk-4835 should renew your compressor out put.

• You can order these parts from Sears Parts Direct .

I hope this will help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
September 07, 2010
A:

I also have this model Sears compressor that all of a sudden wouldn't build above 70psi and kept running - turned out a leaf on the reed valve was broken - it's a small metal plate that looks like three flower petals - however, the valve plate (that it is mounted in - it's between the piston and the cylinder head) is obsolete - so I had to get the replacement and will swap out the reed valve (see below). Shop around for parts - this valve plate (AC-0032) went for anywhere from $27 to $40 online. ----------------- Although the ACG-402 is no longer available, you can use the Devilbus part number Z-AC-0032 along with two Devibus cylinder heads, AC-0805 and AC-0784. If you have all the parts for the old ACG-402 valve plate, you can order the Z-AC-0032 valve plate and just swap the reed valves. However, when I saw how the valve plate had been changed, I really liked it and spent the extra bucks to put the new cylinder heads on. The Devilbus compressor CF2800 is one of the compressors that use the parts above.

Read More
Dezeray S -
October 27, 2010
See more answers

Top Accessories