Model #CD1 YAMAHA Compact Disc

  • No Image Available - Fidelitone
    3 Results
Find part by diagram >

Question and Answers

Q:

Saab Owner's Manual download link?

A:

ManageMyLife.com is a great place to find your owner's manual for various products. I am sorry that you are having some difficulties finding yours. Manufacturers stop producing manuals after ten years. This could be the cause of availability. Sometimes the expert can find one that is very similar to yours. You should hear back within two business days. If you are having a specific problem please submit your question on the existing thread by click on the reply box below for your expert.

Read More
Julio -
May 09, 2013
A:

Thanx for the quick response. If manufactures stop producing the owner's manual how do automobile owners acquire reference reading information about their car's equipment? When you said the expert could find one similar do you mean similar owner's manual year and make? Like within 1-3 years of the year I'm searching for?

Read More
jason -
May 09, 2013
A:

The Helm Inc. link you provided I could only find Saab 2004 to 2009 manuals: http://www.helminc.com/helm/search_service_owner.asp?Style=helm&class_2=SAB , this is the site I checked through your link. I need a 1999 Saab 9-3 manual owner's manual. Any suggestions? Thank you for your help.

Read More
jason -
May 15, 2013
A:

http://www.helminc.com/helm/search_service_owner.asp?Style=helm&class_2=SAB This the site your link took me too, I reposted because I did not know if it posted correctly above.

Read More
jason -
May 15, 2013
See more answers
Q:

Kenmore Water Softener Issues - UltraSoft 180

A:

Water softener troubleshooting can be difficult without help. I would suggest adding the complete model number to help the expert provide the best information possible. I did attach a great site with animations and troubleshooting to help with these issues. I attached to the link below. I hope this is helpful.

Read More
Barbara -
October 28, 2012
A:

Here is the manual of this unit: http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0CC4QFjAA&url=http%3A%2F%2Fwww.softenerparts.com%2Fv%2Fvspfiles%2Fassets%2Fimages%2Fkenmore%2520utrasoft%2520175%2520180%2520625.388170%2520180.pdf&ei=veONUN6XK4HQ9ATpjICIAg&usg=AFQjCNHsfBcaCctlr0WzTqcInB3LM9kdiQ&sig2=GBEz5BkZA3gEARq7qZpssA&cad=rja

Read More
cnfmsu -
October 28, 2012
A:

Retype in a more readiable format: I have a Kenmore UltraSoft 180, installed early 2006 (6.5 years), staring having problem recently: - loss water pressure when it is on service, back to normal in by-pass; - salt tank is flooded; - can not regenerate, nothing discharged from drain line after 2 hours. Here is a list of what I have checked so far, and the setup - whole house filter from the street before going into the water softener - clean the Nozzle & Venturi, seems normal - "fill" cycle does fill the water into the salt tank - on "brining" cycle, tested line come out of "Nozzle & Venturi": had suction for the first 10-20 second, after than the water coming out from it, not as much as the "fill" cycle. - skip the above 2 cycles with "Regenerate" for the remaining cycles, very little discharged from the drain line. - drain line working as normal - open and check rotor, the strip and seal looks new to me Open up the resins tank, it is FULL. It should had 7-11 inch of the "FREEBOARD". I am guessing this may be the reason why the salt tank as flooded as there is not room to brining. Am I right? May be the resins bed is NOT settle as failed to regenerate. I have NOT been running the "CLEAN" for the resins bed. Can I still do that, and how? How do I determine if I have the bad resins? How can I verify it is the issue of resins? Can I empty out the resins, and retest out without them?

Read More
cnfmsu -
October 28, 2012
A:

What happen to the format? Some how it does not take "enter" / "return".

Read More
cnfmsu -
October 28, 2012
A:

Hello,

I would like to assist you with your water softener. When you refer to the resin tank as full, are you referring to resin all the way to the top? If that is the case, it sounds like the resin is degrading due to excessive chemical content in the incoming water and it will need to be replaced, or the softener replaced. If you elect to replace the resin and not the complete softener, you may need to completely disassemble and clean out the main valve assembly and verify that there is no resin debris in the venturi and float systems. I have ran into a few systems on different water supplies that exhibited signs of resin degradation and swelling and softening of the resin can occur and this will expand the area the resin takes up in the tank and can potentially clog it. Sears.com is a link to replacement resin and it will take about one cubic foot to fill your softener.

Please let me know if you elect to replace the resin, I will be happy to assist you further.

Jerry C

Read More
Jerry C -
Sears Technician
October 30, 2012
A:

Enter or return is (
) without the parenthesis.

Less-thanbrgreater-than

Read More
Jerry C -
Sears Technician
October 30, 2012
A:

Jerry, Thank you very much for your comments! #1) yes, it is all the way to the top of the resins tank. they have not get into the rotor value. #2) venturi and float systems are all good per my assessment. #3) do you think I can run the "regen" after empty out the resins from the tank? I like to verify that the unit is still functioning with the exception of resins. Can I do this? Do you have any reference where I can get the resins? Thanks

Read More
cnfmsu -
October 30, 2012
A:

Jerry, Thank you for the link for the resins.

Read More
cnfmsu -
October 30, 2012
A:

Hello,

The link in the reply is to the resin, available at Sears.com. I will re-post it at the end of this reply. You will be able to run the softener as normal to test it mechanically after all of the resin is removed. It will simply not soften the water, but will show you if it is working properly. This would be a good idea in your situation.

Jerry C

Read More
Jerry C -
Sears Technician
October 30, 2012
A:

very much appreciate your comments!

Read More
cnfmsu -
October 30, 2012
See more answers
Q:

Frigidaire Refrigerator #FRS26R4CD1: The temp in freezer is 28 degrees, temp in refrigerator is 50 degrees. When we moved the unit was layed down on its

A:

Managemylife.com is a great place to find the answers to just about anything, especially on appliances. I'm sorry about the difficulties your having with your Frigidaire Refrigerator. I did some research for you at Managemylife.com and found an excellent article that I hope will help until your expert can answer your specific question. I attached the link below. I

Read More
James -
August 09, 2011
A:

Thank you for your question. I know it can be frustrating when the refrigerator stops working. Based on the information listed, this will be a sealed system problem. When a unit is laid down, all it takes is a couple of seconds to affect the sealed system. It's recommended to leave the unit off for 24 hours, after it has been laid down. I recommend leaving it off now for 24 hours and hopefully the system will settle back and it will start cooling again, when it's turned back on. If it still won't cool properly, a sealed system job will need to be done, which will require a technician. I'm listing a site you can access, to have a tech come out. Here is a link for the website: Sears Home Services . I hope this will help you. Thank you for using Manage My Life.

Read More
Scott D -
Sears Technician
August 10, 2011
See more answers