Model #CCE3400W JENN-AIR Counter Unit Electric

  • Top Assembly
    3 Results
  • Body
    3 Results
  • Wiring Information
    3 Results
Find part by diagram >

Question and Answers

Q:

How do I wire the dual infinite switch on my Jenn Air cook top?

A:

According to your serial number (11879086MD) you will not need the part number 74007715. This switch will not work on your cook top based on your serial number. I recommend canceling the order on that part.

The instruction sheet that I sent you is intended for service technicians. It provides technical instructions for wiring your new switch. The instructions on the entire sheet must be carefully followed. I reviewed the instructions and your original wiring diagram (illustrated in the first image below). (NOTE: I was not able to access an accurate wiring diagram for your cook top without the serial number.) The sheet provided previously gives proper technical instructions for wiring this new infinite switch. According to the wiring diagram below, your cook top uses an L2 piggy back connection. You will need to connect the black jumper wire as shown on the instruction sheet. You will need to separate the red wires as indicated on the piggyback instructions and connect them properly to position 2 and position P2 on the new switch. The instructions provide numbers in parentheses (the second number pertains to the numbers on the wiring diagram shown below) for connecting the wires from the previous switch. The wire colors are shown on the wiring diagram below. These wires must be connected properly. If you are not completely confident in your technical ability to accurately connect these wires using the information that has been provided, I recommend calling a service technician to install this part.

Read More
Lyle W -
Sears Technician
November 21, 2008
A:

I have the same cook top and ordered the switch part#12002052 can someone tell me what post the wires go on thanks, craig h

Read More
Craig -
February 12, 2015
See more answers
Q:

How do I wire a dual infinite stove top switch?

A:

The replacement switch (12002125) should have come with the wiring instructions that I provided below. If you do not completely understand the instructions or have any doubt about the correct wiring of this switch, resubmit your question with additional details including the serial number of your Jenn Air cook top. If you are not completely confident in your technical ability to properly wire this switch, then you may need to call a service technician to complete this repair.

I recommend that you check the serial number of your cook top to make sure that you have the correct part. If your serial number begins with the letter M or higher (N, P, Q, R . . .), then the correct part number for a dual element infinite switch would be 74007715.

Read More
Lyle W -
Sears Technician
November 19, 2008

Top Parts