Model #CAPTURE SEARS Carpet Cleaner

  • Cleaner Kit
    3 Results
Find part by diagram >

Question and Answers

Q:

New Prgressive Vaccum 21514. When I slide button for the powerhead to come on the main motor turns off. How can I correct this?

A:

I can understand how frustrating it might be when your vacuum is not working correctly. The more information you provide the better result you will get by the expert. The suggestion that i have for you is to place the full model number so that way he can answer your question more specifically.

Read More
celene -
December 10, 2010
A:

Model # 116.2151.4010

Read More
Aubie 3 -
December 10, 2010
A:

Thank you for your question.

Not having the vacuum motor running when the power mate is on is a concern.

If the vacuum motor works on the hard floor settings then we know the suction motor circuit is ok.

  • It sounds like the problem is in the slide handle switch and will need to be replaced.

If the unit is still under warranty I would suggest that you take just the handle hose assembly in to be repaired.

If it is not under warranty then we will need to take the handle assembly apart and change the switch out.

  • You will need to remove the 3 to 5 screws in the handle half and split the handle making sure you locate how the switch is captured between the two halves of the handle.

NOTE; how the switch is wired before you replace with the new switch to make sure have it pointing the right direction.

The part number for the switch assembly is;KC87GDKNZ000 and you can purchase it from;Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired by a Sears technician. Here is a link that will provide the nearest drop-off locations: [Sears Home Services | http://services.sears.com/shs/category/repair?sid=MMLxexpertxmerch

I hope this will help with your vacuum issue.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
December 11, 2010
A:

Thank you--- it is still under warranty so I will take it in. Thanks again for your reply.

Read More
Aubie 3 -
December 11, 2010
A:

Hi Sam, My issue is I can't get the 2 halves of the wand apart. I'm afraid to pull too hard, otherwise it seems like it may break. Does it slide apart or do you pry it apart. If prying, where do you start to make it easiest to separate? I Only need to replace the spring for the wand release button, so should be trivial once I get it apart. Thanks!

Read More
keith -
January 09, 2016
See more answers
Q:

Error code ER 1F 79571039010 Kenmore Elite Refrigerator

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Joseph -
May 11, 2013
A:

I can understand how frustrating it is to have issues with your refrigerator.  The error code ER IF means that the main control board lost a feedback signal from the icing fan motor for over 115 seconds. This fan is located in the rear of the freezer section, on the left side of the fan cover. The fan supplies cold air for the compartment where the icemaker is located. The error code may be cleared by disconnecting power to the refrigerator for about 3 minutes, then plugging the unit back in. The code will be cleared, but may come back if the icing fan does not start running. If the error continues to come back after the power has been reset. There may be ice formed around the fan housing preventing the fan from running. The fan cover can be removed, but is time consuming and difficult. You could just unplug the unit for 24 hours and leave the doors open. This will allow any ice build-up to melt and return the unit to proper operation. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
May 12, 2013
A:

I am having the same problem with my model 795.72053.118. Is there a faster way to defrost the fan because I'm going to lose my food from freezer? Also, how can I stop this from happening again?

Read More
steven -
June 03, 2014
A:

I am having the same problem. What do I do until I can get the repair guys out? Is there a way to unplug the ice maker.

Read More
DAVID -
October 11, 2014
A:

Same problem and very frustrating. Is Sears looking at fixing this or are we just expected to live with wasting a day defrosting every time.

Read More
Ted -
October 29, 2014
A:

I have the same problem (Oct. 31). Error code "Er If" Our fridge is just over a year old (out of warrantee). Tried your recommendations - unplugging worked for a few hours but the error returned and turning it off for 24 hours is not an option. I scheduled Service and was removing some of the freezer items to a backup freezer - and guess what - the error went away! Everything is working again. Recommendation: Unload/reduce the amount of food in your top two freezer drawers. I also reduced the amount of food stored in the bottom, but not significantly. Problem went away within 1 hour and has been working without error since (Ice & Water are now working). Guess I can cancel the Service appointment.

Read More
Mary -
October 31, 2014
A:

The humming sound coming from my refrigerator is mind bending. It's Halloween and my refrigerator is haunted. You can see the refrigerator and hear the noise from our den. We've already had a technician out about two weeks ago, he couldn't find anything. Thanks for all of your post, we're on the three minute countdown now. I 'll let you know if it works.

Read More
Yvonne -
October 31, 2014
A:

4 days after cleaning my fridge I got error code 1F, I unplugged and replugged and the code went away but re-appeared overnight. I took panic mode to Google and read on this site that it means the main control board lost a feedback signal from the icing fan motor for over 115 seconds. The fan supplies cold air for the compartment where the icemaker is located. - Flash - back!! The doors were open for a long time during cleaning (while fridge was on) maybe too much warm air went in and disrupt ' feedback signal'. I checked behind freezer drawers and behold there was ice build up. I unplugged removed drawers and got to work melting the ice away with a hood hair dryer outside the back and hand held blow dryer inside behind the drawers (be careful, but it beats 24 hrs.) Thank heavens, code went away and it's all good so far. Keep those closed and don't overstock.

Read More
Val -
January 21, 2015
A:

mine did the same thing, i emptied the fridge, defrosted for 24 hours, all ice build up is gone but now the er 1f code comes in within a few minutes of plugging it back in every time, i have left it unplugged for 5min to one hour, many different times. Looks like our top of the line fridge that is 18 mo. old is gona need expensive repair, nex time i will deffinetly go to costco for appliances, they have way better customer satisfaction policy, sears will do nothing about this, there is a class action i found on the internet about this problem. filling out the claim now.

Read More
al81 -
February 03, 2015
A:

Just had the same problem and sure enough ice was built up over the fan housing. Thankfully, all I needed to do was take a small hammer and gently tap the block of ice to remove. I cleared some small pieces inside the small front slit of the housing but I think the big solid chunk was the cause as it was blocking air flow in the freezer section. The good thing about these lower freezer models is that you don't have to deal with the fridge section warming up. I did all this without unplugging as I wanted to see if the error cleared once this was done and it did. Removing the 3 drawers is simple too and we needed to clean out our freezer anyway so it worked out. Hope this helps someone...

Read More
Michael -
March 15, 2015
See more answers
Q:

Lawn Mower Model 917.376722 Replace Ground Drive Belt 917.376722


Top Parts