Model #C50XDEC1Y007 KENMORE Attachments (Vacuum)

  • Power Mate
    3 Results
Find part by diagram >

Question and Answers

Q:

kenmore powermate not getting electrical contact with wand

A:

I know how important it is to have a good working vacuum cleaner in the home. While you are waiting for an expert to respond, I have attached a helpful link below that may provide information to assist you with your question.

Read More
Yadira B -
December 02, 2012
A:

Thank you for your question on the power mate not working but the canister motor does.

First push the reset button on the power-mate to see if that will reset the power to the power-mate.

Depending on the model canister it could be the control board inside the canister or it could be the connection between the lower wand and the power-mate. Also check the plug in contacts at both the top of the wand and the bottom of the wand for any arcing or pitting on the pins and sockets on the wand and handle connections.

If you have a volt/ohm meter you can check for 120 volts ac at the bottom of the wand with the handle switch in the carpet position.

Please let me know what you find out and we can continue to troubleshoot with that information. Please reply with the model number under the canister.

Sam A.

Read More
Sam A -
Sears Technician
December 03, 2012
See more answers

Top Parts