Model #C14 SHOP VAC Carpet/Floor Sweepers

  • Unit Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Need parts Catalog Manco 405B-11

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
We do carry a select few models from the Manco brand, but model 405B-11 is not one that we recognize for diagrams and parts. We do have diagrams and parts for 435B, 436C, 436C-14, 495B, 496B, 6150, 7150, 606C-14, and 496B-04. If none of these models matches what you have, it may be worth running an online search for the brand and model of what you are working on to find part numbers. From there, you can plug the part number into SearsPartsDirect.com to get pricing and availability. Hopefully this helps.
Let us know if we can be of any further assistance and thanks for using SearsPartsDirect.com. 

Read More
Jeff Wallace Sr -
Sears Technician
February 10, 2014
Q:

Parts 139.664953 garage door opener. 139664953 Craftsman Sears electronic garage door opener with receiver

A:

Thank you for contacting SearsPartsDirect.com with your question about the gears for your Craftsman Garage Door Opener. Unfortunately due to the age of the product, the manufacturer no longer makes the individual gears or the gear kit for this opener. Because of the lack of available repair parts for this model I recommend replacing the opener with a newer, more secure system. I have included the link for you to view the current models available from Sears.

Garage Door Openers

I hope this helps. If you need further assistance, please resubmit your question with additional details. Thank you for choosing Sears, we appreciate your business.

Read More
Rachel Morgan -
Sears Technician
January 13, 2014
Q:

Oil Leakage with Husqvarna lawnmower

A:

Having an oil leak in a lawn mower can be extremely aggravating. While you are waiting for your expert answer, I did some research on the unit. At this time, I was unable to locate information that would be helpful in regards to your question. Your expert will answer within 24 to 48 hours with detailed information. Thank you for using Manage My Life.

Read More
Julio -
August 09, 2012
A:

Because of where the oil is showing up at, I have a feeling the lower oil seal has failed. I do recommend you clean the mower completely and top the oil off, then run the mower for a bit and check around for signs of fresh leaking oil to determine exactly where the oil is leaking from.

Thank you for using Manage My Life!

Read More
Wade_B -
Sears Technician
August 10, 2012
A:

Wade, Thanks for the reply. I haven't cleaned the mower yet. I did look and see if it was possibly coming from the oil filler tube. That looks clean, and has no cracks. If it is the lower oil seal, is it worth repairing? Thanks. Ralph

Read More
Ralph -
August 15, 2012
A:

Yes, the lower oil seal is pretty easy to replace in most cases. I will drain the oil from the engine and then screw a small screw into the seal. Then grab the screw with some pliers and pull the seal out. Then drive a new seal in place, fill engine with new oil, and mow grass.

Read More
Wade_B -
Sears Technician
August 15, 2012
A:

Hi I have a CRAFTSMAN ROTARY LAWN MOWER 6.75 Horsepower Power-Propelled 21" Multi-Cut Model No. 917.374821 I was getting out of oil very frequently and i found it keeps dripping from the center of blade... I tried to pin point and removed the blade and the rubber cover from the bottom but all i see is oil dripping from the rod where blade was tied in, could you be able to suggest best way to find whats part is bad.. ? and instruction document/link if possible. honestly i am not sure how to reach to the lower oil seal

Read More
Hawkee -
May 25, 2013
A:

@Hawkee: You may need to take the engine off of the mower and then remove the lower sump to get the seal out. On many engines, that is about the only way to easily remove the lower seal.

Read More
Wade_B -
Sears Technician
May 26, 2013
A:

Wade, thanks for your response. I tried to find the culprit and here i am with removing parts apart - http://i1351.photobucket.com/albums/p790/ratneshsing/20130527_102114_zpsbf9519c5.jpg http://i1351.photobucket.com/albums/p790/ratneshsing/20130527_102205_zps1b7dc995.jpg http://i1351.photobucket.com/albums/p790/ratneshsing/20130527_102159_zpsc13b933b.jpg http://i1351.photobucket.com/albums/p790/ratneshsing/20130527_102150_zps5c14f0d8.jpg Please let me know if above pics give you any clue or you still suggest me to keep going ahead with removing engine out ? I was suggested by sears customer service to buy this seal : http://www.searspartsdirect.com/partsdirect/part-number/32600/0071/143&pathTaken=partSearch&blt=14&prst=0&shdPart=32600 i am not sure if that's the one i need to replace ? could you guide me please ? also do you know if i can find the detailed instruction to replace somewhere ? (doing it 1st time.. :( )

Read More
Hawkee -
May 27, 2013
A:

Uploaded pics here as well...

Read More
Hawkee -
May 27, 2013
A:

I do believe the seal they suggested will work for your engine. For the most part, all you have to do is get the old seal out and then carefully press the new one in. The main thing you need to do is oil the new seal and the crankshaft before you put the seal in. Otherwise, the rubber on the seal will grab the crank and push the rubber out, causing it to not seal off properly. You can try to pull the old seal out without taking the engine off and apart, but it's tedious most of the time. I have put a wood screw into the seal and then grabbed the screw with pliers and extracted the old seal that way. Doesn't all the time work, but it's worth a shot since the seal has to be replaced anyway.

Read More
Wade_B -
Sears Technician
May 27, 2013
A:

Thanks Wade, So do i have to open these bolts (as shown in the attached pic) to reach to the seal ? please correct me if i am wrong

Read More
Hawkee -
May 27, 2013
See more answers