Model #C11 SHOP VAC Carpet/Floor Sweepers

  • Unit Parts
    3 Results
Find part by diagram >

Question and Answers


What does error code c 11 mean? 79043920000 Kenmore Elite Cooktop


Thank you for choosing and being a valued member.  I can certainly understand how frustrating it can be when your cooktop is not working properly.

Shorted keypad. The  defective control will flashes

the error code in its display.

1-Cycle power onaffected zone.If stuckbuttoncomesback whilezone ison then proceed.
2-Verifythereisnomechanicalinterferencenearthedefectivecontrol(harness, metallic devices,etc.).
3- Replace defective control.

You can also visit for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
June 22, 2015

length of blade for 119.224000 119224000 Craftsman Bandsaw


Hello, glad to help.  Thank You for choosing Sears
I am sorry and do understand your frustration when there is questions about the blades on the bandsaw.
Glad to help out.   Im  looking at your Craftsman Bandsaw model number 119224000.

The length of the blade  #
1-JL20020001C  is 11 inches.
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our

Read More
Larry L -
Sears Technician
July 18, 2014

I removed the blade from my saw and it measured over 80 inches. It can't be 11 inches. What length blade should I get?

Read More
Al -
October 30, 2014
See more answers

I have an 80 gallon water heater. The upper heating element is bad. Can i order a part from you folks. its an A.O. SMITH ENERGY SAVER. MODEL# EEH 80 917 .? EEH 80 917


Thanks for the inquiry and for using
I was not able to verify the model provided as being one that we carry parts for or one that is valid. The closest resembling model we have listed that matches with what you've provided is EES80T917. 
Based upon the model I was able to identify, the heating element is being offered as key number 5 on the parts list for the upper element, with the exception of 5D, which is for the lower element. There are differences in the elements based on length and wattage. You may have to pull the upper element and measure the length and see if there is a wattage provided for it. Key number 5 on the diagram is for an 8", 1000w element. 5A is 11" and 1500W, 5B is 11 1/2" and 2000W, and 5C is 11 1/2" and 2500W. 5D is the lower element. 
I would first ask that you verify the model to see if it matches with what I've found, if so, then you can refer to the blue link below to view the parts breakdown for this model and order the correct spec of element. 

Parts Breakdown for Model EES80T917

Hope this helps. I know how important it is to keep mama happy. If mama isn't happy, nobody is. Thanks for using SearsPartsDirec.tcom.

Read More
Jeff Wallace Sr -
Sears Technician
April 24, 2014