Model #C102 JENN-AIR Counter Grill, Electric

  • Control Panel
    3 Results
  • Top Assy.
    3 Results
  • Burner Box Assy.
    3 Results
  • Blower Plenum
    3 Results
Find part by diagram >

Question and Answers

Q:

CRAFTMAN RADIAL SAW 113-19770

A:

I know how important it is to have the correct parts for your saw to keep it running strong. I did some research and I was able to find a link in where you can get help finding the part you need. I hope this helps with your part search while you wait for your expert response.

Read More
Joseph P. -
September 05, 2012
A:

Thank you for your question on the replacement overload for the radial arm saw.

The original overload switch is no longer available from the manufacture but I did find the Klixon branded replacement from the supplier.

I will give you the link to look at for a replacement.

Thermal overload for radial arm saw motor .

Take a look at this and it should work for your saw motor.

Sam A.

Read More
Sam A -
Sears Technician
September 06, 2012
See more answers
Q:

Oil Pressure Light

A:

I'm sorry about the difficulties your having with your vehicle. I did some research for you and found an excellent web page that I hope will help until your expert can answer your specific question. I attached the link below. I hope the provided information is useful to you. Just copy and paste to view. http://www.google.com/search?q=Oil+Pressure+Light++I+have+2001+Dodge+Status%2C+102%2C000+miles.+After+the+engine+is+warm+whenever+I+take+my+foot+off+the+trottle+the+oil+pressure+lamp+appears+on+the+dash.+When+I+step+on+the+gas+the+oil+lamp+light+goes+off.+How+do+I+remedy+this+problem%3F&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a

Read More
James -
June 01, 2011
A:

Thanks James. I'll check it out.

Read More
David -
June 01, 2011
A:

Sounds like you need a new oil pump. You need to attach a manual gauge to the vehicle to confirm that the pressure is dropping below spec. first. Take to an ASE certified repair facility to have it further diagnosed. Longer you wait the more damage will occur.

Read More
MikeLangton -
Sears Technician
June 07, 2011
A:

Thank you. From what I'm researching it sounds as if it is a bad oil pump or worn engine bearings. Thanks for your help.

Read More
David -
June 07, 2011
See more answers
Q:

What would cause my big screen tv to have a dark red picture??

A:

Phillips or Magnavox televisions have a replaceable fluid in the tubes. The fluid is a clear coolant. Over time this coolant gets cloudy and will give a colored haze and will look out of focus. Typically the blue and the red are most effective. This fluid can be very hard to replace. If any of it is leaked onto the boards below it can cause them to stop working. I would recommend to call a TV service technician to come and replace this fluid for you.

Read More
Dusty J -
Sears Technician
July 22, 2008

Top Parts