Model #BT3100 RYOBI Saw Table

  • Motor/gearshaft/cabinet Panel
    3 Results
  • Sliding Miter Table Assembly
    3 Results
  • Rip Fence Assembly
    3 Results
  • Motor Assembly
    3 Results
  • Blade Guard Assembly
    3 Results
  • Replacement Parts
    3 Results
  • Leg/upper Brace/leveling Foot
    3 Results
Find part by diagram >

Question and Answers

Q:

Miter table extended fense with stop BT3100

A:

 
Thank you for choosing Sears Parts Direct. I can certainly assist you in locating an extension fot your miter fence on your miter saw. I did look into the model number you have provided and I have found miter fences, but they are only the orignials that go with the unit. Sears.com has miter fences, but I am not seeing an extension. 
http://www.sears.com/search=ryobi%20miter%20saw%20fence%20extension?catalogId=12605&storeId=10153&levels=Tools_Power+Tool+Accessories_Miter+Saw+Accessories&autoRedirect=true&viewItems=50&redirectType=CAT_REC_PRED&prop17=ryobi%20miter%20saw%20fence%20extension

I
 would recommend contacting Ryobi to see if they do sell an extension kit for your miter fence. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.


Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
June 18, 2014
Q:

Ryobi model #BT3100 - motor slowed over time until eventually stopped BT3100 Ryobi 10" table saw

A:

Thank You for choosing Sears PartsDirect.com. Glad to help out. Im looking at your model number BT3100 and I would first check the brushes. They are located on the side. They are covered with a small cap(#16)  that will screw out.  The brushes are the pieces that keep the motor working. I do not see a capacitor listed on the parts list for the unit. If you have further questions please resubmit your question with a additional details. Thanks for choosing Sears PartsDirect.com.
SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others. 
 
 
 
 
.

Read More
Sherman_G_Wallace -
Sears Technician
February 27, 2014
Q:

replace blade guard assembly 315218290 Craftsman 10" table saw

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com

I am sorry and do understand your frustration when needing parts for your Table Saw.

Glad to help out.   Im  looking at your model number 315.218290.

Im looking at Sears Parts Direct and shows me the blade guard assembly in the dotted box as key number 7.   It is sorry to say "No Longer Available" as a whole complete unit.   I searched thoroughly from my research department and could not find it available to get.    I searched the part number A182011001 for the complete assembly and get the same bad news.   It is availabe from us in all the separate pieces if you want to get them that way.   Sorry for the trouble of having to go the long way of getting them all.   Good luck.

 If you have further questions please let me know.

Thanks for choosing Sears PartsDirect.com


Read More
Larry L -
Sears Technician
September 16, 2013

Top Parts