Model #ATF6000FS0 FRIGIDAIRE Residential Washers

  • Control Panel
    3 Results
  • Cabinet/top
    3 Results
  • Motor/tub
    3 Results
  • Wiring Diagram
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Reinstallation of Door lock and switch assembly ATF6000FS0 Frigidaire Washer

A:

The procedure for replacing the door lock assembly on this type of washer is shown in the image below. Unplug the washer to disconnect electrical power before accessing this internal component.

You will not have to remove the front panel. Remove the boot retainer and peel the boot away from the left side of the door lock assembly in order to pull the door lock assembly out. Once you have the door lock assembly pulled out then you can disconnect the wires.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website:Sears Home Services .

 

http://www.managemylife.com/images/77-stored/76656/original/image9108083350477926514img-or.jpg?1379697166 

Read More
Sherman_G_Wallace -
Sears Technician
November 20, 2013

Top Parts