Model #ATB1935HRQ AMANA Top-Mount Refrigerator

  • Compressor (rev 10)
    3 Results
  • Controls
    3 Results
  • Shelves & Accessories
    3 Results
  • Freezer Compartment
    3 Results
  • Fresh Food Outer Door
    3 Results
  • Fresh Food Inner Door
    3 Results
  • Freezer Outer Door
    3 Results
  • Freezer Inner Door
    3 Results
  • Optional Ice Maker Kit-uki1500axx
    3 Results
  • Supplemental Information
    3 Results
  • Wiring Information
    3 Results
  • Compressor (rev 11)
    3 Results
  • Compressor (rev 15)
    3 Results
  • Compressor (rev 16)
    3 Results
Find part by diagram >

Question and Answers

Q:

Buzzing, clicking: not cooling today ATB1935HRQ Amana Amana refrigeration

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
Sorry to hear of the issue you are having with the Amana refrigerator, I know how frustrating cooling issue are to have occur.

This type of clicking noise is coming from the start assist kit on the compressor. It indicates that either the start device is weak or the compressor is stuck. The only way to determine if the start device or compressor is the problem is, with the proper meters. Without the meters, the only alternative is to replace the start device and capacitor and see if they solve the issue. If not, the compressor is stuck and will need replacement or the refrigerator will need to be replaced.
If you would feel more confident have a Sears Home Service technician help assist with the diagnosis/repair, you can call 1-800-349-5071, or click here to be directed to the page to set up service.
Hope this helps and thanks for using SearsPartsDirect.com.

 

Read More
Jeff Wallace Sr -
Sears Technician
May 03, 2014
Q:

Ice maker not working ATB1935HRQ

A:

I am sorry that you are having some difficulties with your ice maker and I will be happy to help. I did manage to find a link that will provide you with some good information. I hope this helps with your research while you wait for your expert response.

Read More
Joseph P. -
February 27, 2013
A:

Thank you for your question. I know it can be disappointing when the icemaker stops working. This icemaker has some test terminals on the module that may help determine what the problem is. To access the terminals, pull the front cover off of the icemaker. The terminals will be marked (see picture) and using a well insulated jumper, place it between the L - V terminals. Be careful this is a hot (live) check. With the jumper in place, water should flow to the icemaker. If water does flow, the icemaker will need to be replaced. If no water flows but you can hear a humming noise, the water valve will need to be replaced. If nothing at all happens, some voltage checks will need to be made. A technician may be needed to make these checks. I'm listing a site you can access, to have a tech come out. Here is a link for the website:  Sears Home Services . If you would like more assistance, reply to this thread and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
February 28, 2013
See more answers

Top Parts