Model #AT25 KUBOTA Front Tine, Gas Tiller

  • Cylinder
    3 Results
  • Air Cleaner - Muffler
    3 Results
  • Crankshaft
    3 Results
  • Carburetor
    3 Results
  • Bonnet
    3 Results
  • Governor Lever
    3 Results
  • Recoil Starter
    3 Results
  • Magneto
    3 Results
  • Transmission Case
    3 Results
  • Bevel Gear
    3 Results
  • Blade Rotor
    3 Results
  • Handle Frame
    3 Results
  • Handle
    3 Results
  • Front Fender
    3 Results
  • Attachment (trencher)
    3 Results
  • Attachment (rake)
    3 Results
  • Attachment (rake)
    3 Results
  • Option Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Recommended oil AT25

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
Due to the age of this Kubota, Sears does not have any of the documentation for the tiller or engine. However, most small engines will take SAE 30 weight non-detergent motor oil. I would feel safe to use that with the engine. I see some service manuals listed online for the unit, but none of which are free, they price between $20-$30. I also see there was an oil decal or label at one point, if it's still on the engine, you may be able to reference it.
Hope this helps and let us know if we can be of any further assistance. Thanks for using SearsPartsDirect.com. 

Read More
Jeff Wallace Sr -
Sears Technician
March 08, 2014
Q:

clutc AT25 Kubota Tiller at25

A:

I cannot seem to find a manual of any sort for this machine. I've sent a request off to Kubota to see if they can lend any advice on this clutch system. If you have a local Kubota dealer, they may have a manual on hand and they may photo copy some pages dealing with the clutch.

If I hear anything back from Kubota, I will post that information on this thread.

Thank you for using Manage My Life!

Read More
Wade_B -
Sears Technician
October 08, 2013
Q:

clutch AT25 Kubota Tiller at25

A:

The gears may be fine, but the clutch assembly may be the problem. If the axle was causing the issue then it wouldn't turn at all. It's possible that the axle gear is seriously worn and that would possibly cause this. However, I wouldn't overlook the clutch assembly as the springs could be failing and causing the problem.

I think you'll end up having to take the machine down further to determine what's gone wrong.

Thank you for using Manage My Life!

Read More
Wade_B -
Sears Technician
October 08, 2013