Model #ASB3206 MCCULLOCH Blower, Gas

  • Cylinder/muffler/fuel Tank
    3 Results
  • Impeller/frame/harness
    3 Results
  • Flex Pipe/pipes
    3 Results
Find part by diagram >

Question and Answers

Q:

Replacing starter assembly housing and pawl assembly for asb3206

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Barbara H. -
November 17, 2011
A:

There has to be something going on with the pawl assembly. I can't figure what would cause it to grab when pulled slow but not when pulled fast enough it's just hanging up.

I don't have one of these machines here for me to get into to see if I can duplicate the problem.

I contacted the manufacturer to see if they can give us any insight as to the problem. You can also contact them if you'd like to see if they can work directly with you. You can CLICK HERE to initiate a dialogue with them directly.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
November 19, 2011
A:

Thank you for your time, but it is just getting so frustrating with this blower right now, I am not happy with the product.

Read More
Roger -
November 21, 2011
A:

I can certainly understand your frustration with this. I've done a little more digging around trying to come up with something for this and have nothing useful. I show this machine to be pretty new, if that's correct you should be able to take this in to have it repaired under warranty. If the machine is less than 30 days old you should have no problem returning it to have it replaced.

Read More
XX Wade_ -
Sears Technician
November 21, 2011
See more answers

Top Parts