• Replacement Parts
    3 Results
Find part by diagram >

Question and Answers


24 " Dishwasher not working. It's plugged in. Checked all of the connections-wire to transformer, transformer to motor. It is a Kenmore Quietguard Standard.


Dishwashers are great time savers. The problem with the dishwasher is concerning. I found some information for you that I am hoping will help you. Please click here:[Kenmore Dishwasher].Your expert will also help answer your question. It may take two business days for your expert to reply. I do hope that everything works out on the Kenmore dishwasher.

Read More
Marc -
August 06, 2013

Thank you for your question and I understand your concern.

You did not make it clear where the constant clicking noise appeared to emitting from. Was it coming from the control panel or from underneath the dishwasher? You also did not indicate if any of the LED's is lit up on the control panel or not.

If there are no LED's lit up, the incoming voltage supply should be disconnected and measured with a voltage meter. NOTE: Flip the house circuit breaker OFF before removing the lower toe panel and the electrical junction box cover. Remove the wire nuts connecting the two black wires and the two white wires. The voltage is measured across the black and white wires supplying the voltage. If 110-120 volts is measured, the next step is to reconnect the power supply to the dishwasher and then access the control board and measure the voltage supply across the white wire connected to P2-9 and black wire connected to P2-3 and then across the white wire (P2-9) and the black wire with the white stripe connected to P2-2. Note: The door switches will need to be closed when making the voltage measurements across P2-3 and P2-9.

I added an image below of the wiring diagram with troubleshooting steps. NOTE: I do not recommend making any voltage checks unless you have experience and feel safe and confident in doing so; otherwise I suggest calling a service technician to diagnose and repair your dishwasher.

Check the things I have covered here and if I may be of further assistance as more details become available, please reply to this post.

If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link:Sears Home Services.

Read More
Joey S -
Sears Technician
August 07, 2013
See more answers

How do I trouble shoot my dishwasher?