Model #AGQ7000ES1 FRIGIDAIRE Residential Dryer

  • Cabinet/drum
    3 Results
  • Front Panel/lint Filter
    3 Results
  • Controls/top Panel
    3 Results
  • Motor
    3 Results
  • Burner
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

What does dr mean? AGQ7000ES1 Frigidaire Dryer

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Marc -
April 28, 2013
A:

Thank you for your question and I understand your concern.

I understand that "dr" is displayed but this what your details says; My dryer won't start. I press start and I get a flashing "dr," what does this mean?

Since I do not understand what the details say, I can say that "dr" means the control does not detect the Door being shut or the door is shut and the door switch is not closed.  Check that the door is closed and the door catch is not broken, and nothing is stopping the door from closing like it being bent or clothes.  If the door is shutting properly, it could have a faulty door switch. The door switch can be disconnected and tested for continuity with an Ohm meter. With the door switch button pushed in, the Ohm meter should measure continuity when measuring across the orange and brown wires. Disconnect the power cord from the power source before servicing.

I added an image below with instructions for accessing the door switch.  If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link:Sears Home Services.

 I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post. 

 

Read More
Joey S -
Sears Technician
April 30, 2013
See more answers
Q:

On the PCK2003 lp conv. kit do you install the alignment collar on the "Ice Cream Scoop" style burner or just the "flame spreader" style? Instructions not clear

A:

I do not see an alignment collar listed in the instruction sheet. I believe you are referring to the air shutter & yes the ice cream scoop style will need the air shutter installed. Please see the instructions provided in the link below. Please include the dryer model number if further assistance is needed.

http://10.70.208.67/tech_tip/mech/frigidaire/dryer/134315200.pdf

Read More
biker dave -
Sears Technician
May 13, 2010
A:

The dryer model number is AGQ7000ES1. I'm thinking that the alignment collar is not to be used. I'm not even sure what the "flame spreader" style burner is. They don't show a picture of it. Also if you were supposed to use it no matter what I think it would have come permanently installed in the new burner not giving you the option.

Read More
Steven -
May 14, 2010
A:

The alignment collar is a separate piece from the shutter. The instructions are very clear about installing the shutter.

Read More
Steven -
May 14, 2010
See more answers

Top Parts