Model #AES28AWF SPEED QUEEN Residential Dryer

  • Control Panel-rear Control
    3 Results
  • Control Panel-front Control
    3 Results
  • Control Cabinet/controls
    3 Results
  • Control Panel-stacked Models
    3 Results
  • Loading Door-without Window (1 Of 2)
    3 Results
  • Loading Door-without Window (2 Of 2)
    3 Results
  • Loading Door-with Window
    3 Results
  • Access Panel/front Panel/seal
    3 Results
  • Motor/exhaust Fan/belt
    3 Results
  • Front Bulkhead/air Duct/felt Seal
    3 Results
  • Front Bulkhead/air Duct/felt Seal
    3 Results
  • Bulkhead/felt Seal/cylinder Roller
    3 Results
  • Heater Duct/element Assembly
    3 Results
  • Heater Duct Assembly
    3 Results
  • Gas Valve/igniter/conversion Kits
    3 Results
  • Cabinet/exhaust Duct/base-single
    3 Results
  • Cabinet/exhaust Duct/base-stacked
    3 Results
  • Lead-in Cord Gas Models
    3 Results
  • Terminal Block/terminals
    3 Results
  • Terminals
    3 Results
  • Terminals/terminal Extractor Tools
    3 Results
  • Wire Harnesses/wires
    3 Results
Find part by diagram >

Question and Answers

Q:

needing part for speed queen dryer model aes28awf

A:

Thank you for your inquiry on your Speed Queen Dryer, Model: AES28AWF. From reviewing the details on your model, I will be happy to assist you. There is no way for you to send a picture of the part. I have linked up the parts diagram for your convenience.

Click Here

Safety Warning: Before beginning the repair, disconnect the direct power supply to the dryer to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663.

 

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
May 23, 2015
Q:

i have a 4 year old speed queen dryer mod# aes28awf that is not heating, the heater tests out ok and so does the fuse.

A:

The dryer not heating can keep you from getting some of the laundry done. I am sorry for the inconvenience and I did manage to find two links that will provide you with some good information. I hope this helps while you wait for your expert response.

Read More
Joseph P. -
April 17, 2012
A:

Thank you for your question and I understand your concern.

You said you have 220 volts going to it but I must assume you mean to the dryer and not the heating element. If you had 220 volts when measuring across the two wires connected to the heating element; the heating element would have to be bad.

Did you disconnect the wires from the heating element before you check the continuity of the heating element? The heating element should measure 9 to 10.5 Ohms of resistance.

If the heating element measures continuity, the heating element is not getting the 220 volts needed in order to heat. I added an image below of the wiring schematic and diagram. I traced the heater circuit in Red and Black so that you see the other components in the circuit which must be close/have continuity in order to complete the L1 (line one) and L2 (line two) legs of voltage to the heater.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
April 18, 2012
See more answers

Top Parts