Model #AED4475TQ1 ADMIRAL Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers

Q:

Getting into dryer AED4475TQ1 Admiral Residential dryer

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your dryer. Upon researching model AED4475TQ1; the lint screen needs to be removed. There is a screw or two under the lint screen. Remove the screws. There is a gap above the door frame and under the top. There is a tab on the left and right side of the gap. You would need something flat like a putty knife. Push the putty knife through the gap to push on the clips. Once the top is disengaged it can be lifted up. There a screws holding the front panel on from the inside. The screws need to be removed. Once removed the front can be lifted up a little and pulled forward. The drum can be removed or kept in place.  

Thank you for choosing Sears. We appreciate your business. Have a great day.    

Read More
Jeff Wallace Jr -
Sears Technician
March 18, 2015
Q:

Indoor venting of dryer AED4475TQ1 Admiral Residential dryer

A:

Thank you for choosing sears I would be happy to help you with your dryer. Upon researching model AED4475TQ1; to reduce the risk of a fire the manufacture of this dryer does not recommend that the dryer is venting indoors, this dryer is designed to be vented outdoors. I have posted a link of the installation guide that shows the venting requirements on page #11-13, to view the installation guide link click here.

I trust that this information will help you, thank you have a great day.

Read More
CarlosZ -
Sears Technician
February 11, 2015
Q:

Dryer only heating on low changed all thermal fuses and thermostat switches. Heat coil is good. AED4475TQ1 Admiral Residential dryer

A:

Thank you for choosing SearsPartsDirect.com. I will be more than happy to assist you. I can understand any frustration you may have experienced with regards to your unit. Let’s see what we can do for you.

Sense you have changed all the major components for the heating system the only other option could be the timer. But before changing or even ordering it I would suggest retesting the two thermostats, one thermal cutoff, and one thermal fuse. Click here to watch a video on how to properly test these components.

Hope this information has helped you. If you are not comfortable doing this repair you can click here to schedule a technician or call toll free 1-800-469-4663. Again, thank you for choosing SearsPartsDirect.com.

 

Read More
JeffwallaceIII -
Sears Technician
December 20, 2014
A:

Thank you for your support your answer is correct, after checking the timer switch I found it was bad. Replaced timer dryer is working great. Thank you again for your help. Reginald

Read More
Reginald -
December 20, 2014
See more answers

Top Parts