Model #A9200 MAYTAG Residential Washers

  • Control Panel
    3 Results
  • Top Cover, Console & Lid Switch
    3 Results
  • Tub, Agitator, Mounting Stem & Seal
    3 Results
  • Cabinet, Water Valve, Hoses & Frnt Panel
    3 Results
  • Orbital Transmission
    3 Results
  • Base, Pump, Motor & Components
    3 Results
  • Clutch, Brake & Belts
    3 Results
  • Export Parts (120v-60hz)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Not continuing cycle A9200

A:

Thank you for choosing SearsPartsDirect.com. I will be more than happy to assist you.  I can understand any frustration you may have experienced with regards to your unit. Let’s see what we can do for you.

What it sounds like it the Lid switch isn’t registering the lid is closed, and for it do start the cycle. I would replace the lid switch, as this should resolve your issue. The correct part number for the lid switch would determine on witch series model you washer is.

Hope this information has helped you. If you are not comfortable doing this repair you can click here to schedule a technician or call toll free 1-800-469-4663. If you have any further questions or concerns, you will have to post a new question. Again, thank you for choosing SearsPartsDirect.com.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Samantha A -
Sears Technician
August 11, 2014

Top Parts